Originally Posted by DAIN_JA_RUS
sorry i suck at tech stuff. the LPR piston is that in the qev box itself ? or somewhere else on the marker
The LPR is the spike that sits under the barrel. It converts the High pressure air from the High pressure reg or "HPR" to Low pressure to operate the more sensitive parts of the Ego like the Noid.
Its all in the manual off the PE website they should have a exploded view. Where you can see how everything goes. It's not a noid issue is an LPR (Low Presure Reg) piston issue. The original LPR piston was glued and over time delaminates its self from the piston causing the noid to over pressurize and vent threw the hole you described. It dose this so the noid dose not get damaged. I learned this the hard way after purchasing a replacement noid at $140 that I did not need
its less then $20 for the part and you dont need tools to replace it.
did you check the link I posted? Thats the part you will need. But try replacing all the o-rings on the LPR before buying the part. (use grease not lube on the LPR)
Link to the part http://paintballshowcase.com/planete...rpiston08.aspx
Manual can be found in the drop box http://www.planeteclipse.com/site/product_support