[nguyen4524]

So I have a friend who recently bought an infinity legend for cheap, and it was working well when we shot it. Took it back sat around, and now when we try to shoot it, the bolt shoots for a few shots, but when I walk the trigger its like the bolt pin falls out of place and it can no longer shoot? I maintained almost everything so I'm not sure what's going on, and help would be appreciated, thanks!

[DeadOnpBaller51]

Try tightening the set screw on the back of the bolt. That should do a better job of holding the bolt pin in place.

Also, make sure the bolt pin isn't in backwards.

[vnandez]

^^This^^. Also, try adding some oil to the ball bearing in the bolt and work it in with the pin. Had the same issue with mine.

[killer_ghost]

If its a v2 bolt it doesn't have a screw in the back. You can try putting a cloth over the bolt pin and tapping it a few times with a screwdriver so it fits snug into the bolt.

[emerluvinpb!]

possibly your spring. make sure your pin sits proper on the ram

[g1141]

First make sure your pin in the slot on your ram.
If it is.
Take a file and file down the bottom edges of your pin.
It most likely has a burr on it that is keeping it from going all the way into the ram.

Glenn
Infinity Paintball