[monkeyballer099639]

Originally Posted by 2ez4me

just rumors now..im sure it will be out for cup tho def.

Hey guys, can we please keep this thread on topic?

I still need to try this out. Was a little hesitant, but now the reviews have made me curious.

[richyrich1]

Heald it in Chicago nppl feels amazing looks great comes with dif trigger and a barrel kit.prob not worth 1650 they are asking but I will pick one up if it makes it a year.

[MarkeyMark]

Originally Posted by jason_vanguard

Thank you for your kind words sir,
I did transfer your warranty to your self as good will, being a second hand marker.
I'm sure I answered your pm,s too.
Would you like any more assistance?
We are not going anywhere and I really look forward helping you out again.
Please though when you pm me be more specific about the finicky ******* markers with bad customer service then I will know
not to waste my Time replying and trying to help you out.

Lol! Get em Jason!

[tgallo]

Originally Posted by SHOOTNPOO

Its Nasty Vapor time.
Custom Vapors will be hitting the streets shortly.

And I just got mine.....if one of these custom jobs catches my eye I see a 2nd Vapor in my future

[facemower1211]

Originally Posted by jason_vanguard

Thank you for your kind words sir,
I did transfer your warranty to your self as good will, being a second hand marker.
I'm sure I answered your pm,s too.
Would you like any more assistance?
We are not going anywhere and I really look forward helping you out again.
Please though when you pm me be more specific about the finicky ******* markers with bad customer service then I will know
not to waste my Time replying and trying to help you out.

. good ****

[TwIgZ]

Originally Posted by tgallo

And I just got mine.....if one of these custom jobs catches my eye I see a 2nd Vapor in my future

Haha, just ordered my second... And it's a custom

[SHOOTNPOO]

Originally Posted by TwIgZ

Haha, just ordered my second... And it's a custom

A custom or swapped parts? Big difference

[godraep]

Originally Posted by jason_vanguard

Thank you for your kind words sir,
I did transfer your warranty to your self as good will, being a second hand marker.
I'm sure I answered your pm,s too.
Would you like any more assistance?
We are not going anywhere and I really look forward helping you out again.
Please though when you pm me be more specific about the finicky ******* markers with bad customer service then I will know
not to waste my Time replying and trying to help you out.

You know, I had a long winded reply to this.. but I wont even bother. Believe what you will, nothing I said was untrue. I wouldnt come here, to the hub of paintball on the internet and slander a company for no reason. This has gone far off topic, and I wont continue that.

[tgallo]

Originally Posted by TwIgZ

Haha, just ordered my second... And it's a custom

custom how?

[TwIgZ]

Originally Posted by SHOOTNPOO

A custom or swapped parts? Big difference

Custom ano from Michael (pbautotrader$

[ProMod]

YES! VIEW MY POST AND HAIL ME AS YOUR CHAMPION!

Sorry, I got carried away xD I worked 10 hours today followed by 4 hours of private training, and came home to a steak dinner. So I'm in a good mood and I need something to do before I pass out. That being said, here's the full strip of the Vapor. (with a few re-used pics of the reg and main bolt assembly; they haven't changed xD)

SEE MY POST ON PAGE 62 FOR INITIAL IMPRESSIONS

So, here's the core next to a 2.0 luxe core




... and stripped down (basic)




Full Strip!




... this is the spring and can (it's a self-sealing valve, like on the clone or droid. this helps with efficiency!)




OH! and here's the reg stripped down...




Here is the marker without the reg and bolt




Grips are thin enough. they extend out about as far as the NXT grips, but they feel better.



eye covers first. They're the same offset pistons that the luxe uses. BTW the magnets are REPELLING from the body, so they tilt out when you slide the lever backwards. It's IMPOSSIBLE to do this on the field (and they won't come out accidentally) because of how deep the latch slides into the body.




You can see I've bent the microswitch lever a little to make the trigger more to my liking




Board and back-plate for the OLED (plastic case to keep the OLED safe from paint and hard knocks)




Feedneck is built into the body




and it strips from this....




to this:




ASA is simple enough








here's the inside of the grip (trigger removal)




and what's left in the body (also note the milling around the magnet to route eye-wires!)




SMC noid breakdown is cake




Note that there's no manifold. It's all milled into the body.




There's really not much to these markers. Not as complex as a luxe strip, and the frame/body is more like a shocker or an ego really. It's super-simple and it's done quite cleanly. No problems taking this guy apart at the field. Also, I couldn't figure out how to take the latches out of the eyes. I don't foresee this to be a problem as I can't imagine how you'd break them, and cleaning them is stupid-simple (take eye cover, soak in rubbing alcohol for 10 seconds, dry off)

[OLD_B4LL3R]

Wow - what a break down!



.

[2ez4me]

Thanks for the breakdown def legit

[Vegard]

You can see the mill marks people speak of in the above breakdown pictures.
There's less tool marks in my 13 year old LCD Angel..

At the current pricepoint I find the vapor too expensive, though it's still an interesting marker which I'll look into when the prices plummet.

Originally Posted by godraep

You know, I had a long winded reply to this.. but I wont even bother. Believe what you will, nothing I said was untrue. I wouldnt come here, to the hub of paintball on the internet and slander a company for no reason. This has gone far off topic, and I wont continue that.

It's libel when it's in written form
His response looked forced, he tried his best to make himself and the company he works for appear in a better light, alas his grammar failed him.

[tgallo]

Originally Posted by TwIgZ

Custom ano from Michael (pbautotrader$

I see. I am curious to see if they come out with custom milling (ie Nasty)

[PbN_AutoTrader]

Mill marks
Where
On the under body?

You do know this gun Is milled from a solid block of aluminum and not cast, right

Not sure how you get too expensive
2 triggers
5 pc barrel kit
OLED
Hopper
Compared to other high ends the price is fair if not actually competitve. Case and point luxe 1500. 1 triigger no barrel kit no hopper. I guess cheaper or free could always be better though?idk

What's a trigger worth? 50 bucks?
Barrel kit 100+?
Hopper 200+

$350+/- of "goodies" not mentioning any of the gun's actual features etc.

[juggernaught_lives]

You forgot OLED

[godraep]

Originally Posted by Vegard

You can see the mill marks people speak of in the above breakdown pictures.
There's less tool marks in my 13 year old LCD Angel..

At the current pricepoint I find the vapor too expensive, though it's still an interesting marker which I'll look into when the prices plummet.



It's libel when it's in written form
His response looked forced, he tried his best to make himself and the company he works for appear in a better light, alas his grammar failed him.

Im cool with everyone believing him.. let em see for themselves. Im guessing since he didnt reply to my pms asking what information he needed my warranty is under godraep instead of my actual, real name. =p

[~TOMA KIDZ~]

It comes with a hopper?

[Luigi Speed 05]

what hopper? did I miss something?

[~TOMA KIDZ~]

Not sure how you get too expensive
2 triggers
5 pc barrel kit
OLED
Hopper
Compared to other high ends the price is fair if not actually competitve. Case and point luxe 1500. 1 triigger no barrel kit no hopper. I guess cheaper or free could always be better though?idk

he said it