Originally Posted by Tikiman12
the feedneck is easy. Remove teh collar, heat the neck with a hairdryer and then us force to unscrew it (righty tighty lefty loosy)
The trigger, you need to remove the frame form the body. Push the trigger pin out of the marker, I dont remember if it needs to go out the left or the right side.
-Check the manuel that you can download in the stickies and it will tell you how to remove both of these parts.
Tiki has the right idea. Personally I heat feed neck / body up with the blow dryer and clamp a hopper or piece of PVC pipe (It's T'd for leverage) really tight and lefty loose. Usually comes right off
*When putting the new feed neck on, I suggest adding some blue loctite (red is a pain to remove if you want to change the feed neck again)*
For the trigger look at the pin. You should see a side with starry grooves that's the direction you want to tap it out (best done with a small hammer and a tap or something thats small enough to just hit the pin.) I know personally for me it came out on the right side.
Well good luck