[kingkid]

for some reason my joystick won't go to the right. It will turn to the right but won't make the settings go to the right. It will make them go up or down and left.

Someone told me that it may be popped out of place or something? What should I do?

[erikguti]

this is strange, yesterday i repair and put my old luxe board and i have the same problem than you, i start pushing it right and keep it push to the right (i live it press for about 10 seconds) and it pass from fire mode to dwell then i keep doing it until it start to work normaly !!!! i also take the fist thing that help the joystick direction

[Icuras]

press it down then move it right

[kingkid]

neither of these worked for me.

[kingkid]

Does anyone have any ideas? i'm thinking of just calling DLX.

[YSU_Baller13]

I've ran into the same problem. I can go up, down, and left, but not right. If I take the speaker housing out it works fine.

[MachineGunCrew]

I just fixed mine. Your joy stick on the bottom is shaped like a square, in which the actual "button" is supposed to fit in. If your's does not fit. Take off the speaker cover, and align the 2 pieces carefully. If you do it correctly it should work just fine!

[kingkid]

Originally Posted by MachineGunCrew

I just fixed mine. Your joy stick on the bottom is shaped like a square, in which the actual "button" is supposed to fit in. If your's does not fit. Take off the speaker cover, and align the 2 pieces carefully. If you do it correctly it should work just fine!

Alright thanks. I'll try this when I get home. and post the results.

[midgetmofia04]

Originally Posted by kingkid

Alright thanks. I'll try this when I get home. and post the results.

hey logan i hope u get this fixed and where yall playing this sunday?

[JOHNNY G]

I'm having the same
Problem but my joy stick won't go down

Video of the problem
http://i254.photobucket.com/albums/h...7/de017735.mp4

[gildy1]

I had this problem on an early numbered 1.5, what i did was take a firearm file, very small fine file, and get in between the slot for the joy stick and carefully removed a TINY bit of material. That worked for me, no issue.

[Dahas]

Originally Posted by MachineGunCrew

I just fixed mine. Your joy stick on the bottom is shaped like a square, in which the actual "button" is supposed to fit in. If your's does not fit. Take off the speaker cover, and align the 2 pieces carefully. If you do it correctly it should work just fine!

man this thread is too old but im glad i saw this! all this time i thought my joystick switch is broken. i tried to realign my joystick today and its working good now.

[JOHNNY G]

Originally Posted by Dahas

man this thread is too old but im glad i saw this! all this time i thought my joystick switch is broken. i tried to realign my joystick today and its working good now.

I realign and it still didn't work for me

[Giruc]

sloution pop the joystick and cover use a allan key a small one to lightly lape the button in the direction u want and scroll through the modes

[JOHNNY G]

Originally Posted by Giruc

sloution pop the joystick and cover use a allan key a small one to lightly lape the button in the direction u want and scroll through the modes

That's what I been doing but I want to use the bored the way it was intended to be used

[Mrob1995]

I had a similar problem on my 2.0 but the settings wouldn't move down. DLX told me to take the joystick off and use an Allen key, BUT afterwords you can put the joystick back on and this can realign it. You may have to fiddle with it some, but it's doable.

[StinkyPistachio]

I'm new to the Luxe family but had a slight hiccup while installing the 2.0 board in a 1.5. I removed the joystick from the 1.5 board, and found it was very loose on the 2.0 board. Seemed like the hole in the bottom of the joystick was too big for the nub thing on the board. There was a lot of wiggle room, so I had to move the joystick a little more in any direction to actually activate the button. With the speaker cover on, several of the directions would not work, since the cover restricts how much the joystick can move.

The solution I went with is a bit more permanent, so not sure I would recommend it, but I just used a tiny amount of Gorilla glue, and held the joystick in the upright position for a few seconds while it tried. Now there's no wiggle, and with the speaker cover in place it can go in any direction.

So, if your joystick is really loose, maybe give this a shot.

[JOHNNY G]

Called luxe about my joystick problem and there still not back from Chicago. I wish I could figure this **** out.