 |
06-07-2011, 01:46 PM
|
#1
|
|
That one guy
Join Date: Mar 2011
Location: Tampa, FL
|
Will an automag work on 650psi?
I have a guerilla gen1 myth reg, it's output is only 650psi. Can I use that with a mag?
|
|
|
|
06-07-2011, 02:42 PM
|
#2
|
|
PLAY IT - Paintball
Join Date: Apr 2004
Location: St. Louis
|
on a classic mag it will be fine, assuming the myth actually stays at or within that 650 psi range, if it an RT that is near the minimum working psi, it will probably work with minor adjustments but no guarantees
|
|
|
|
|
06-08-2011, 08:20 AM
|
#3
|
|
A Grim and...
Join Date: Apr 2006
Location: ..Frostbitten Kingdom
|
It can work for slow rates of fire, but I'd bump up the pressure if I were you. I actually had the same issue and called GA and they sent me a spring/port kit to bring my pressure up to 850 psi, I think I only paid $15 out of pocket. It took me 5 minutes to switch it out.
Or, as cheap as Hp regs are from Ninja and Crossfire anymore, you could just buy a new reg. Both Ninja and Crossfire tend to work better on Mags, as they are higher flowing. But if you're not intending to Pneumag it or get the RT effect, a standard 850 psi should ensure that you're chuff-free.
|
|
|
|
|
07-02-2011, 02:28 PM
|
#4
|
|
Hebrews 13:8
Join Date: Sep 2005
Location: Florida
|
Even with the spring kit I couldnt get two different myths to do the
job with my mags. They never did do more than 700 and the recharge rate
is not good at all.
Get a Ninja reg and you wont have any chuffing problems.
This tank had a Ninja on it :
http://www.youtube.com/watch?v=hE7OpmGvXMo
I just got another Ninja for $25 shipped, click "make offer" and put 25 in there:
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT
 |
|
|
|
07-03-2011, 02:28 AM
|
#5
|
|
|
Quote:
Originally Posted by going_home
|
I swear by those Ninja reg's now. Fantastic, especially for the price. |
|
|
|
|
07-04-2011, 06:48 AM
|
#6
|
|
www.BIGEVILONLINE.com
Join Date: Dec 2005
Location: Staten Island
|
You can get them to run in the 650-700 range, but not with that POS reg. The flow rate on them sucks. I run my Xmag at 700 psi with a Dynaflow. They are incredible regs.
__________________
www.BIGEVILONLINE.com - Even more awesome paintball forum :-P
Home of the BEO-MAFIA
RIP IMPACT PB :(
|
|
|
|
|
07-04-2011, 06:44 PM
|
#7
|
|
A Grim and...
Join Date: Apr 2006
Location: ..Frostbitten Kingdom
|
The newer Stealth regs from Crossfire are also the ticket. I recently swapped my Myth (850psi) out for a Stealth and noticed a HUGE improvement. The Myth always worked, but only when the tank had 1500+psi in it. After that, I had to stop walking the trigger or it'd chuff. I also swapped my Tickler Lpr for a Palmers and the thing is near-unchuffable now. Definitely as fast as an electro on semi. Damn, there needs to be a "guns blazing" smily on here...
|
|
|
|
|
05-18-2012, 03:36 PM
|
#8
|
|
|
Pressures
Mag valves are barely operating at 600 PSI. Dont care about recharge rate. 800+ or a damn good bottle like a Dynaflow is required. Realistically, if they had their way, Mags would prefer 1000+ PSI. I know a couple RT's that love about 1200 PSI.
|
|
|
|
|
05-18-2012, 09:53 PM
|
#9
|
|
Join Date: Jan 2008
Location: Illinois
|
I have a very early myth reg on a 45/45 that I use all the time on my classic valved mini-mag and Ive never had a problem but Im pretty conservative and patient when I shoot so Im not really trying to shoot tons or lay ropes so Ive never had a problem with it chuffing due to poor recharge.
__________________
WHY GIRLS SHOULD DATE A PB PLAYER: 1.WE KNOW HOW TO GET DOWN AND DIRTY. 2.WE ALWAYS WEAR PROTECTION. 3.WE HAVE AT LEAST A 14 INCH BARREL. 4.WE FIRE OFF HUNDREDS OF ROUNDS WITHOUT GETTING TIRED. 5.WE KNOW HOW TO FOLLOW INSTRUCTIONS. 6.WE CAN FIT INTO TIGHT SPOTS. 7.WE LOVE TO BE AGGRESSIVE. 8.WE NEVER FORGET TO LUBE OUR PRODUCTS. 9.MONEY IS NO LIMIT. 10. A CONDOM IS A MUST
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
