From your experiences, what's the best psi to use with the luxe? I was using 450 psi, but only shooting around 270-280 fps. Gonna try 550 psi this weekend. Also, does efficiency suffer with a higher psi?
As per Rob@ninjapaintball, 550psi is what they found to be the optimal output pressure needed for the luxe to cycle properly. The luxe will run perfectly fine on high pressure, but a mid pressure would be easier on your reg *not as much work needed*. A lower output pressure in theory would give you a few more shots per fill but if you want to save yourself a few bucks, just use your standard adjustable reg and just remove the shims as needed. I think if you just leave one red one in, you'll be sitting at about 600psi. shoot rob a pm, he's always more than willing to help out.