[ValkenWinter]

Okay kids,

First off the only OFFICIAL upgrade at this time is the new front clip (see previous thread for purdy pics) If you dont haz, pm me your contact info and I'll get it out to you.

Battery Drain:

Still working on it, mine still do it too. Im pissed off. Remove or flip your batteries after play.


Batteries:

Use GOOD batteries! Not that Berkley Jensen stuff.....


Star Sensor/Turnstile

A sticky turnstile will slow the loader, again, pm me.


Feed Paddle:

WE DO NOT SEND PINOKIO PADDLES FOR UPGRADE! The Pinokio paddles are to stiff for a clutchless system like ours. Hence, our softer paddles



Questions or comments?


Winter@Valken.com



Hope I helped

[tlmiller]

So what can I do about the fact that mine still won't feed over 10 bps on marker even after sending it to you and getting back with "everything working correctly"?

[ValkenWinter]

Originally Posted by tlmiller

So what can I do about the fact that mine still won't feed over 10 bps on marker even after sending it to you and getting back with "everything working correctly"?

On what gun?

[tlmiller]

DM9, PM8, Naughty Dogs Shocker, Demon, multiple Quests, Zodiac Renegade ZR1, Angel 1. I don't think I've tried it on the Aura yet, or the Marq, definitely not on the o3m.

[ValkenWinter]

Originally Posted by tlmiller

DM9, PM8, Naughty Dogs Shocker, Demon, multiple Quests, Zodiac Renegade ZR1, Angel 1. I don't think I've tried it on the Aura yet, or the Marq, definitely not on the o3m.

And you cant get to 10?

Everything here I work on is shot tested with paint on one of my guns. If it wasnt coming up to speed, it would NOT have gone back out to you. check your turnstile/star for paint/grunge. Make sure the dowel pin its on is clean and free of anything (grease/oil) and the star spins freely.

Gimme a yell if its still a problem

[cfl mike]

Thanks Winter, I talked to you on the phone when I got my update part too. After you explained to me that the "upgraded" paddle or turnstile isnt from Valken, its a Pinokio one, I was telling people on here the issue with it. Of course I dont know if they took it from me or not, good thing you said it.

Yea I still have the battery drain problem, and my loader will feed like 16 BPS, so obviously not getting near the advertised 30 BPS.

BTW, that new "Ninja Star" or bin sensor that you sent to me, is that different from the one I have in my loader (if there are different versions I probably have the first)?

[ValkenWinter]

Originally Posted by cfl mike

Thanks Winter, I talked to you on the phone when I got my update part too. After you explained to me that the "upgraded" paddle or turnstile isnt from Valken, its a Pinokio one, I was telling people on here the issue with it. Of course I dont know if they took it from me or not, good thing you said it.

Yea I still have the battery drain problem, and my loader will feed like 16 BPS, so obviously not getting near the advertised 30 BPS.

BTW, that new "Ninja Star" or bin sensor that you sent to me, is that different from the one I have in my loader (if there are different versions I probably have the first)?

Nope, same one....just a bit more refined...

[p8ntballinsbest#2]

i have the pinokio paddle in my V-max and it works great, seems to feed faster and easier than the stock one. but maybe its different for every V-max???

[cfl mike]

Originally Posted by p8ntballinsbest#2

i have the pinokio paddle in my V-max and it works great, seems to feed faster and easier than the stock one. but maybe its different for every V-max???

Well it might do that but what I was told is that it will probably burn out your motor/drivetrain at a much quicker rate.

[ValkenWinter]

Originally Posted by cfl mike

Well it might do that but what I was told is that it will probably burn out your motor/drivetrain at a much quicker rate.

This.....

[p8ntballinsbest#2]

oooooooo, ok, i see what your saying, so will there be a stiffer paddle but less stiff than the pinokio paddle comming out.?

[ValkenWinter]

Originally Posted by p8ntballinsbest#2

oooooooo, ok, i see what your saying, so will there be a stiffer paddle but less stiff than the pinokio paddle comming out.?

Ahem...

Thats Area 51

[cfl mike]

Originally Posted by ValkenWinter

Ahem...

Thats Area 51

Hopefully you guys got a redone speedfeed in there too.

[SplatopiaUnited00]

So for everyone who owns a vmax and it can't barley keep up with ten bps I think I have an answer to why it doesn't work. Well I bought my vmax and used it on my axe and it worked just fine then when I got a dm8 it couldn't keep up then once I got an ego 08 it worked again. It seems that any gun the vmax goes on and the feedneck is small and sit the vmax right on top it won't feed properly. Because the common things between the axe and ego 08 is that the feednecks are a bit longer and allows the vmax to sit there and still have a gap of space in the feedneck. But i think its due to have no really tension on the stack at all

[tlmiller]

Originally Posted by p8ntballinsbest#2

oooooooo, ok, i see what your saying, so will there be a stiffer paddle but less stiff than the pinokio paddle comming out.?

God I hope so. I so would love to be able to use my Vmax for anything faster paced than pump (yes, a slight exagerration).

[jrob530]

Originally Posted by tlmiller

So what can I do about the fact that mine still won't feed over 10 bps on marker even after sending it to you and getting back with "everything working correctly"?

I had the EXACT same thing happen to me, I was really excited about getting this loader and Valken let me down.

[p8ntballinsbest#2]

so can i put the pinokio motor in my vmax? or will that power of the motor fry the board?

[sh4d0vv]

things not to do, buy one...lol

[cfl mike]

Originally Posted by sh4d0vv

things not to do, buy one...lol

Opinion = take it to the VS thread or someone that asked for it which = no one.

[ValkenWinter]

Originally Posted by sh4d0vv

things not to do, buy one...lol

Your money is YOUR money. If you dont wish to purchase a V-Max....so be it. Have you ever used one?

[ValkenWinter]

Originally Posted by p8ntballinsbest#2

so can i put the pinokio motor in my vmax? or will that power of the motor fry the board?

Im not sure what the power draw is from the Pin. I would RATHER you didnt......but, if we must tinker.....