[Nexxux]

I disassembled my entire axe and made an Oring List for you guys.

Here ya go:

Stock Axe


Lurker Eigenbolt Axe


Boss v2(XSV/Infamous) Axe

[SNAKESNIPER (Banned)]

what about the bolt guide o-ring that sits closest to the back of the guide, behind the bolt?

[Nexxux]

for the stock, thats the 4th front bolt guide oring

[Nexxux]

shoulda just named it bolt guide orings

its just my rough draft. i can correct the names and stuff if anyone points stuff out

[SNAKESNIPER (Banned)]

Originally Posted by Nexxux

for the stock, thats the 4th front bolt guide oring

Right. I'm wondering what size it is though?

[Nexxux]

mine was the same as the front bolt orings - 1.5x11mm BN70

i use the lurker so i have no back bumper oring. but i put the 1.5x11mm BN70 on and installed the stock bolt, and it seemed to fit and work perfectly.

im also not positive of oring boss's new xsv and infamous bolts use as the back bolt guide bumper to shot the fragile paint. the optional oring. if anyone knows, let me know and ill put it on the list for boss v2 axe.

[SNAKESNIPER (Banned)]

Really? Can anyone confirm that the rear o-ring is the same as the front ones?

Reason I ask, is because I just un-installed my Lurker bolt, and I can't remember what o-ring to put back on the rear of the bolt!

[Nexxux]

haha, you have the same problem as me then ;-)

also, does the boss bolt use the same rear bolt guide bumper?

[TheBoss33]

Yes all four small bolt guide o-rings (including the bumper) are the same size. I do not change that o-ring for use with any of my bolts.

[Nexxux]

alright thanks, which oring do you change on your xsv or infamous bolt to shoot more fragile paint with a dwell of 10ms then?

[SNAKESNIPER (Banned)]

Correct me if I'm wrong, but you replace the o-ring that's closest to the bottom of the bolt with the supplied replacement o-ring. (I just read the instructions )

[TheBoss33]

Originally Posted by SNAKESNIPER

Correct me if I'm wrong, but you replace the o-ring that's closest to the bottom of the bolt with the supplied replacement o-ring. (I just read the instructions )

Correct

[Nexxux]

bottom of the bolt? do you mean the rear 017 oring on the bolt itself?

[hth_1]

Sorry for the Necro but would you happen to have this list for a mini as well?

[Nexxux]

Nah. I don't own a mini at the moment or I could do one for ya.

[SNAKESNIPER (Banned)]

Try asking Simon on the Simonized Forums, he may be able to help.

[hth_1]

Thanks man, I will definitely try there.

[SNAKESNIPER (Banned)]

[7paintball]

Thanks for the list

[hth_1]

Originally Posted by Nexxux

Nah. I don't own a mini at the moment or I could do one for ya.

Oh man if you could you'd be pretty awesome in my books

[incognito-z]

Great list. Thanks for doing this!