Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 04-17-2012, 05:00 PM #1
samp's Avatar
Join Date: Mar 2012
Location: Texas
Problem with pianha gti

I'm trying to replace the cup seal on my piranha but the cup seal is stuck on the metal rod can anyone help me out
samp is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 04-19-2012, 07:40 AM #2
grendal50's Avatar
Join Date: Nov 2007
The cup seals are molded on to the valve pins on most(all?) of the Piranha's. If all toy have is a separate cup seal you need a Spyder valve pin as well. I'm pretty sure they fit
"Some people say that I must be a terrible person, but itís not true. I have the heart of a young boy in a jar on my desk." -Stephen King
grendal50 is offline   Reply With Quote
Old 04-27-2012, 04:59 PM #3
plushdragon's Avatar
Join Date: Sep 2003
 has been a member for 10 years
plushdragon helped look for balloons
there use to in the old days

have a company that made rubber cup seals and pins...I still holding one to the one set i the op if you think yours is leaking try using some very fine sand paper..if it a burr on the plastic. if it a leak...check that your not missing the star guild and the spring is going in the right way.also over tighting the valve nut can warp the valve or you put the valve in backwards. the last thing to look is the main spring is it cut to short or did it go soft and the psi going into the gun..if the psi is to low the valve wont close.
Does an ursine quadruped void wastes in an arboreal environment?
plushdragon is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump