[shadoichi]

i picked up my sim4 yesterday and all i need to air it up and check it out is the adapter for the remoteline setup that gets hidden by the mag, specifically the piece that threads into the body of the sim 4... any help would be appreciated, if not i guess i could always drill the hole bigger and thread it to the standard braided steel hose size

[<splatmaster>]

I have a wg-65 and Iv been looking for that adapter for over a year now, you just gave me the great idea to just re thread it not sure why i didnt think of that sooner. I believe the threads are 1/8 inch, but I cant be sure.

[shadoichi]

1/8" npt threads, I re threaded mine to accept braided steel hose from a tippmann, also accepts macroline fittings and you can buy the tap at the hardware store, hope this helps!