[Unable]

So I just received this cocker in the mail today and was hoping someone here could help me with what kind it is.

[baconquilt]

pms mark series?

[Rjutras15]

not sure but i dont think so.

[Unable]

I checked out the pms mark series, and although they do look alike it is not. Not sure if it's a custom milled gun or not. The previous owner said he has never been able to find out the make of the gun.

[Rjutras15]

I'm pretty sure it's a one off.

[kpmurphy]

its an awesome one is the answer

[HaWtDog123]

Originally Posted by kpmurphy

its an awesome one is the answer

What he said. That body is gorgeous! Have you to put paint through it yet?

[Unable]

Unfortunately ive been working a lot so i havent had time to try and tune it. The bolt isnt going back far enough to let a ball down the feedneck.

[masterofTHUMBS]

If you mean that the ram isn't pushing the back block far enough (which wouldn't bring the bolt far enough back), then you will want to adjust both the lpr and cocking rod (hex piece in the back). First adjust the cocking rod to make sure the sear is catching the same time the bolt is back far enough to let a ball in when you cock it by hand. Then adjust the lpr (aired up of course) by raising the pressure until the ram is pushing the bolt back enough when you actuate the 4way.

[Unable]

Even when cocking it back by hand the bolt doesnt go back far enough.

[blame it on god]

Then you need to adjust your cocking rod length.