[The Grim Reaper]

Trying to find which threads are compatible with my Angel ARK...? I want to buy a RAP4 barrel and need to know which manufactures are compatible to allow installation...

[xceolite]

The ARK is A1 threaded. Not a lot of barrel manufacturers make barrels in that threading. CP and Deadlywind make barrels compatible, straight from there websites.

[slick86]

if you have an ifit can use a1 to cocker threads

[dr.strangelove]

Barrels labeled G7 Fly or 06 threads will work as well - there is just a longer shank after the threading so that some of the thread will be exposed when they are installed. 06/A1 threads are the only ones that will fit without an adapter though. Check the "What Barrel Does My Angel Take?" thread in the ultimate sticky to see examples of the various Angel-thread barrels.

[The Grim Reaper]

Thanks Guys, I'll try to use the info to make a good match. Much appreciated!!

[Ryan10]

Originally Posted by The Grim Reaper

Thanks Guys, I'll try to use the info to make a good match. Much appreciated!!

I'd go with a freak kit. If you really like your stock barrel, have it bored out to accept freak inserts.

[Lungorthin]

Theres an upgraded 16" AR:K barrel kit for the ar:k thats apex acceptable with decent barrel backs. Id say go with that if you have the cash. I have one and I quite like it.

[The Grim Reaper]

Originally Posted by slick86

if you have an ifit can use a1 to cocker threads

I went with the ifit idea and it accepts the common A5 tippmann thread so all good now. Thanks for the heads up...!