Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Closed Thread
 
Thread Tools
Old 04-05-2012, 09:19 AM #64
briaschu1
 
 
briaschu1's Avatar
 
Join Date: Jun 2010
Location: Minnesota
briaschu1 has achieved Level 1 in PbNation Pursuit
briaschu1 has perfected Level 1 in PbNation Pursuit
I haven't had my Legend fully aired up since last fall so I can remember but I think I had mine set below 280, I also am running the Rhino Spring though.

Rutley I received your parts today.
Snapped a few pictures when I got to my office at work to try and give everyone a little better look at them.
Just off hand I can say these parts feel super light (which was the point, duh) I will have a even better feel when I get home and hold them compared to my stock parts. The field I play at should be opening soon so I don't have any HPA to do full chrono tests yet but I have been running my markers off of my Air Compressor so I will be able to cycle the marker to get a idea of how the new parts feel.





briaschu1 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-05-2012, 11:18 AM #65
killer_ghost
Bafinity Options!
 
killer_ghost's Avatar
 
Join Date: Jul 2006
Location: PR
The machining on those parts look great. If I'm not mistaken it takes 200-220 psi to get to 280-300 fps. I have a Rhino spring and think I have it set at 180 psi.
__________________
Houston Heat Fan #15
killer_ghost is offline  
Old 04-05-2012, 04:51 PM #66
Havoc.
 
 
Havoc.'s Avatar
 
Join Date: Jun 2011
Ill have to post some comparison pictures myself this weekend. How ironic... Where in MN are you located? We'll have the two best shooting Legends in the state!

Last edited by Havoc. : 04-05-2012 at 04:55 PM.
Havoc. is offline  
Old 04-05-2012, 07:16 PM #67
briaschu1
 
 
briaschu1's Avatar
 
Join Date: Jun 2010
Location: Minnesota
briaschu1 has achieved Level 1 in PbNation Pursuit
briaschu1 has perfected Level 1 in PbNation Pursuit
Midwest MN in the small town of Sacred Heart. I play at Area 22 Paintball outside of Hutchinson.
briaschu1 is offline  
Old 04-06-2012, 01:48 AM #68
YeloSno
Breadloser
 
YeloSno's Avatar
 
Join Date: Jun 2009
Location: East Bay, Carifornia
Annual Supporting Member
YeloSno supports Team VICIOUS
YeloSno is for the Gunfight
YeloSno is one of the top 250 posters on PbNation
YeloSno is Legendary
YeloSno supports Empire
Hmmm, so can you PM me on the cost of the kit? I'd be down to do a comparison. The parts look way better than I'd anticipated.

What's the ram and pin made out of?
__________________
Are You A Beginner?
Maybe a Little Bit?

Thinking of Buying Something, But Don't Know What?
Have A Look Inside for Some Help.


My Current Top TradeBait
BKAYBKEJHFJK FIRE SALE!

It's a ****ing graphite IZE Flex for sale! WOW.

ALT Bazaar
A new top secret project that isn't so secret. Brought to you by the creator of the Ultimate Purchasing Hierarchy and TBQF Technologies.

"Originally posted by Insane_Vendetta: "We used to be schizophrentic, but now we agree.""
"Originally posted by Somnambulistz: i'm not wearing any underwear! :D"
YeloSno is offline  
Old 04-07-2012, 04:54 PM #69
Havoc.
 
 
Havoc.'s Avatar
 
Join Date: Jun 2011
Still waiting on the new orings and spring. Hopefully Ill have them soon so I can use the parts next weekend and give a nice in depth review.
Havoc. is offline  
Old 04-08-2012, 02:26 PM #70
rutley12
 
 
Join Date: Feb 2012
Quote:
Originally Posted by Havoc. View Post
Still waiting on the new orings and spring. Hopefully Ill have them soon so I can use the parts next weekend and give a nice in depth review.
Sorry for the delay. you will recieve them monday! didnt ship till saturday!
rutley12 is offline  
Old 04-09-2012, 01:12 PM #71
imped4now
BTFU
 
imped4now's Avatar
 
Join Date: Apr 2003
Location: Indianapolis
 has been a member for 10 years
I'll buy a set immediately if the testers approve and I can get my hands on another Legend. Love these guns.
__________________
FEEDBACK>>40+ 0-
OlllllllO
Need reliable teching services?
imped4now is online now  
Old 04-12-2012, 10:37 PM #72
rutley12
 
 
Join Date: Feb 2012
Video of Legend With Rutley Bolt And Ram shooting paint

http://www.youtube.com/watch?v=FQJSx...ature=youtu.be
rutley12 is offline  
Old 04-15-2012, 04:28 PM #73
YeloSno
Breadloser
 
YeloSno's Avatar
 
Join Date: Jun 2009
Location: East Bay, Carifornia
Annual Supporting Member
YeloSno supports Team VICIOUS
YeloSno is for the Gunfight
YeloSno is one of the top 250 posters on PbNation
YeloSno is Legendary
YeloSno supports Empire
Holy crap.

And it sounds so much quieter, too. Almost as if starving on air.


Definitely want to buy if I can get some consistency and efficiency numbers as well as a vid on a higher ROF.
__________________
Are You A Beginner?
Maybe a Little Bit?

Thinking of Buying Something, But Don't Know What?
Have A Look Inside for Some Help.


My Current Top TradeBait
BKAYBKEJHFJK FIRE SALE!

It's a ****ing graphite IZE Flex for sale! WOW.

ALT Bazaar
A new top secret project that isn't so secret. Brought to you by the creator of the Ultimate Purchasing Hierarchy and TBQF Technologies.

"Originally posted by Insane_Vendetta: "We used to be schizophrentic, but now we agree.""
"Originally posted by Somnambulistz: i'm not wearing any underwear! :D"
YeloSno is offline  
Old 04-15-2012, 08:51 PM #74
Havoc.
 
 
Havoc.'s Avatar
 
Join Date: Jun 2011
I've been dead in the water for awhile now with not having the lightened spring and better fitting orings (so I could properly gauge it's performance with everything as it should be) and then a combination of bad weather and school deadlines, but I'll be taking this thing out for a go this coming Sunday. I have a chronograph as well, so I'll take a nice Full HD video of my Legend firing with these parts and everyone will get a better sense of the performance boost. I'll also write up a nice review to accompany it; I'll try to keep everyone posted, thanks.

-Ryan
Havoc. is offline  
Old 05-14-2012, 09:45 PM #75
juggernaut326
RIP Towlie
 
juggernaut326's Avatar
 
Join Date: Jun 2007
Location: 850
juggernaut326 plays in the PSP
juggernaut326 donated to help Peyton Trent
Still doing some testing with mine when I get out to play; but I am very impressed to say the least. There is a very noticable reduction in kick and barrel rise. I have my kit set up with Rh1no's spring, and it's been working awesome so far. As far as efficiency increase goes, I will need to play with the dwell and other settings a little more to see if I can get a greater increase than I have been getting.
__________________
USMC
FWB RIPTIDE
Palm Beach Vipers
Proudly Sponsored By
Bob Long Technologies|EKK|Hurlburt Paintball|Ruthlessware.com
HK|EKK ELITE
juggernaut326 is offline  
Old 05-15-2012, 03:09 PM #76
Worldeater
 
 
Join Date: Aug 2009
Location: Norway
Looks interesting. How much would something like this cost? Allso, that bolt pin looks a bit tall. Are you sure you can fit lower sitting hoppers such as the pinokio and the rotor?
Worldeater is offline  
Old 05-15-2012, 07:50 PM #77
juggernaut326
RIP Towlie
 
juggernaut326's Avatar
 
Join Date: Jun 2007
Location: 850
juggernaut326 plays in the PSP
juggernaut326 donated to help Peyton Trent
Rotor fits no problem with the tall pin
__________________
USMC
FWB RIPTIDE
Palm Beach Vipers
Proudly Sponsored By
Bob Long Technologies|EKK|Hurlburt Paintball|Ruthlessware.com
HK|EKK ELITE
juggernaut326 is offline  
Old 05-21-2012, 07:50 PM #78
YeloSno
Breadloser
 
YeloSno's Avatar
 
Join Date: Jun 2009
Location: East Bay, Carifornia
Annual Supporting Member
YeloSno supports Team VICIOUS
YeloSno is for the Gunfight
YeloSno is one of the top 250 posters on PbNation
YeloSno is Legendary
YeloSno supports Empire
How many more would you consider fabricating? I can't get one now, but after a few other things on my list, I'd definitely get this for my personal legend.
__________________
Are You A Beginner?
Maybe a Little Bit?

Thinking of Buying Something, But Don't Know What?
Have A Look Inside for Some Help.


My Current Top TradeBait
BKAYBKEJHFJK FIRE SALE!

It's a ****ing graphite IZE Flex for sale! WOW.

ALT Bazaar
A new top secret project that isn't so secret. Brought to you by the creator of the Ultimate Purchasing Hierarchy and TBQF Technologies.

"Originally posted by Insane_Vendetta: "We used to be schizophrentic, but now we agree.""
"Originally posted by Somnambulistz: i'm not wearing any underwear! :D"
YeloSno is offline  
Old 05-24-2012, 09:48 AM #79
pbbuddy12
I'm more of a 3 wire guy
 
pbbuddy12's Avatar
 
Join Date: Jun 2007
Location: Sterling, VA
pbbuddy12 owns a Planet Eclipse Lv1
pbbuddy12 supports Pev's Paintball
pbbuddy12 is Legendary
Has anyone really confirmed these work across all modes and if there is a notable efficiency improvement and not just feel. Seems like it went back and forth with reviews of works great to gun won't eve reach 260 and barely cycles.

Just to note, TechT kept the zero ping ram, hush bolt, and lo pro pin all the same weight as stock in order to maintain the same moving parts vs valve balance. Eigen has yet to release his g6r rammer primarily because he can not get the performance gains he wants due to lightening the ram causing more problems then gains. Same happened with gen 4 timmys. Lighter is better but when the whole system is designed to operate at one weight and you cut that in half and leave other parts stock it cam cause more headaches than it's worth.

But have not seen anyone with updates on this or their experience with it in some time.
__________________
Pants for Sale
http://www.pbnation.com/showthread.p...7#post79918217
pbbuddy12 is offline  
Old 05-24-2012, 09:55 AM #80
913boyd
 
 
Join Date: Dec 2007
Location: kansas
913boyd owns a Planet Eclipse Ego
913boyd supports DLX Technology
it would not work for me. i had to raise the hpr over 50 psi to get it to chrono to 280 fps. and shooting in psp 12.5 it would chop like crazy.
913boyd is offline  
Old 06-08-2012, 08:11 PM #81
YeloSno
Breadloser
 
YeloSno's Avatar
 
Join Date: Jun 2009
Location: East Bay, Carifornia
Annual Supporting Member
YeloSno supports Team VICIOUS
YeloSno is for the Gunfight
YeloSno is one of the top 250 posters on PbNation
YeloSno is Legendary
YeloSno supports Empire
Uhhh... The gun normally works at 190 psi, so even with any upgrade you could possibly throw at the legend, you'd have to raise it over 50psi anyways.
__________________
Are You A Beginner?
Maybe a Little Bit?

Thinking of Buying Something, But Don't Know What?
Have A Look Inside for Some Help.


My Current Top TradeBait
BKAYBKEJHFJK FIRE SALE!

It's a ****ing graphite IZE Flex for sale! WOW.

ALT Bazaar
A new top secret project that isn't so secret. Brought to you by the creator of the Ultimate Purchasing Hierarchy and TBQF Technologies.

"Originally posted by Insane_Vendetta: "We used to be schizophrentic, but now we agree.""
"Originally posted by Somnambulistz: i'm not wearing any underwear! :D"
YeloSno is offline  
Old 06-09-2012, 03:47 PM #82
pbbuddy12
I'm more of a 3 wire guy
 
pbbuddy12's Avatar
 
Join Date: Jun 2007
Location: Sterling, VA
pbbuddy12 owns a Planet Eclipse Lv1
pbbuddy12 supports Pev's Paintball
pbbuddy12 is Legendary
Quote:
Originally Posted by YeloSno
Uhhh... The gun normally works at 190 psi, so even with any upgrade you could possibly throw at the legend, you'd have to raise it over 50psi anyways.
He means he had to raise it +50 psi over stock parts..
__________________
Pants for Sale
http://www.pbnation.com/showthread.p...7#post79918217
pbbuddy12 is offline  
Old 06-10-2012, 12:44 AM #83
YeloSno
Breadloser
 
YeloSno's Avatar
 
Join Date: Jun 2009
Location: East Bay, Carifornia
Annual Supporting Member
YeloSno supports Team VICIOUS
YeloSno is for the Gunfight
YeloSno is one of the top 250 posters on PbNation
YeloSno is Legendary
YeloSno supports Empire
ooohhhh.

makes more sense.
__________________
Are You A Beginner?
Maybe a Little Bit?

Thinking of Buying Something, But Don't Know What?
Have A Look Inside for Some Help.


My Current Top TradeBait
BKAYBKEJHFJK FIRE SALE!

It's a ****ing graphite IZE Flex for sale! WOW.

ALT Bazaar
A new top secret project that isn't so secret. Brought to you by the creator of the Ultimate Purchasing Hierarchy and TBQF Technologies.

"Originally posted by Insane_Vendetta: "We used to be schizophrentic, but now we agree.""
"Originally posted by Somnambulistz: i'm not wearing any underwear! :D"
YeloSno is offline  
Old 06-30-2012, 02:46 PM #84
Pure eXTCy
 
 
Pure eXTCy's Avatar
 
Join Date: Jun 2012
Pure eXTCy has achieved Level 1 in PbNation Pursuit
Pure eXTCy has achieved Level 2 in PbNation Pursuit
I have played with these parts and would anyone like to know the firing rate? also rutley has his gun as seen in the video on NO STOCK INTERNALS! also i would say that even at the arguements that it is a discontinued gun and these parts cost too much picture this: this gun will shoot faster than an ego as said by an actually speedball ego user.
Pure eXTCy is offline  
Closed Thread


Thread Tools

Posting Rules
Forum Jump