Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-30-2012, 10:25 PM #1
iamthanos
 
 
Join Date: Feb 2012
stock class cocker

Hey guys i am looking to do a stock class project on an autococker. Can anyone help me out by linking me the parts i will need. Stock class feed and drop out changer. any help would be appreiciated
iamthanos is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-30-2012, 10:45 PM #2
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
CCI makes the best drop out changer, as for feed you can mod an autococker to use a phantom stock class feed.
__________________
painter4life05 is offline   Reply With Quote
Old 03-30-2012, 10:53 PM #3
iamthanos
 
 
Join Date: Feb 2012
will the cci drop out fit in the autococker vertical asa?
iamthanos is offline   Reply With Quote
Old 03-30-2012, 11:11 PM #4
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
No it will not my mistake, you need this
http://paintballgateway.com/ccistcl12grq.html
__________________
painter4life05 is offline   Reply With Quote
Old 03-31-2012, 12:23 AM #5
eudaman
Professional Mis-informer
 
eudaman's Avatar
 
Join Date: Mar 2007
Location: Location :Location
eudaman plays in the PSP
eudaman plays in the APPA D4 division
Quote:
Originally Posted by iamthanos View Post
will the cci drop out fit in the autococker vertical asa?
Yes it will, but make sure you know its more involved than just adding parts
eudaman is offline   Reply With Quote
Old 03-31-2012, 12:54 AM #6
EvilAuthorityX
PUMPER_TYLER
 
EvilAuthorityX's Avatar
 
Join Date: Apr 2005
Location: Long Beach CA
EvilAuthorityX is attending Decay of Nations VI
Quote:
Originally Posted by eudaman View Post
Yes it will, but make sure you know its more involved than just adding parts
A cci drop out will not fit a cocker asa
__________________
PS131
98 STO sniper

EvilAuthorityX is offline   Reply With Quote
Old 03-31-2012, 02:15 AM #7
eudaman
Professional Mis-informer
 
eudaman's Avatar
 
Join Date: Mar 2007
Location: Location :Location
eudaman plays in the PSP
eudaman plays in the APPA D4 division
whoops i was thinking quick change thanks for the correction!
eudaman is offline   Reply With Quote
Old 03-31-2012, 09:58 PM #8
iamthanos
 
 
Join Date: Feb 2012
what else i need to add? for drop changer
iamthanos is offline   Reply With Quote
Old 03-31-2012, 10:16 PM #9
kpmurphy
beer
 
kpmurphy's Avatar
 
Join Date: Feb 2012
Location: 706/305
kpmurphy is playing at Living Legends V
kpmurphy owns a Planet Eclipse Geo
kpmurphy supports Pev's Paintball
kpmurphy has achieved Level 1 in PbNation Pursuit
kpmurphy has achieved Level 2 in PbNation Pursuit
kpmurphy is attending Decay of Nations VI
Palmer's makes a feed tube that goes on a 7/8 feedneck. Sanchez too I think. Someone makes one that fits in a normal vertical feed
__________________
Team Mental Diversion
kpmurphy is offline   Reply With Quote
Old 04-01-2012, 09:45 AM #10
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
A drop out changer just screws right into the vert asa just like a normal regulator.
__________________
painter4life05 is offline   Reply With Quote
Old 04-02-2012, 03:40 PM #11
iamthanos
 
 
Join Date: Feb 2012
do i need a special valvue to use the unregulated co2 in the cocker?
iamthanos is offline   Reply With Quote
Old 04-02-2012, 05:01 PM #12
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
It is best to run your co2 regged, palmsers makes a drop out with a reg built in, but its a bit pricey, imo its worth it though
__________________
painter4life05 is offline   Reply With Quote
Old 04-02-2012, 05:25 PM #13
iamthanos
 
 
Join Date: Feb 2012
Quote:
Originally Posted by painter4life05 View Post
It is best to run your co2 regged, palmsers makes a drop out with a reg built in, but its a bit pricey, imo its worth it though
i cant find it on there website. do you have a link for it?
iamthanos is offline   Reply With Quote
Old 04-02-2012, 06:41 PM #14
masterofTHUMBS
boom headshot
 
masterofTHUMBS's Avatar
 
Join Date: May 2007
Location: 703
masterofTHUMBS posts videos on PbNation
masterofTHUMBS is an NCPA player
masterofTHUMBS supports Pev's Paintball
masterofTHUMBS plays in the APPA D5 division
I haven't seen a quick change with a reg before but you can get away without using a reg if you use red springs for the valve and hammer.

Last edited by masterofTHUMBS : 04-02-2012 at 07:30 PM.
masterofTHUMBS is offline   Reply With Quote
Old 04-02-2012, 06:41 PM #15
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
i fail
__________________

Last edited by painter4life05 : 04-02-2012 at 09:06 PM.
painter4life05 is offline   Reply With Quote
Old 04-02-2012, 08:52 PM #16
EvilAuthorityX
PUMPER_TYLER
 
EvilAuthorityX's Avatar
 
Join Date: Apr 2005
Location: Long Beach CA
EvilAuthorityX is attending Decay of Nations VI
Quote:
Originally Posted by painter4life05 View Post
That's not a drop out
__________________
PS131
98 STO sniper

EvilAuthorityX is offline   Reply With Quote
Old 04-02-2012, 09:06 PM #17
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
I apologize I have failed this thread
__________________
painter4life05 is offline   Reply With Quote
Old 04-02-2012, 09:15 PM #18
pumpmonkey1
did your hopper jam?
 
pumpmonkey1's Avatar
 
Join Date: Jul 2010
Location: Alabama
pumpmonkey1 has achieved Level 1 in PbNation Pursuit
feed system options

I have a superbolt, so I used a pvc pipe. If you have a threaded feedneck, you can do the same. Here is the link to my post:

http://www.pbnation.com/showthread.php?t=3708844

That will give you all the info you should need to build one for under $3.

If you do not have a threaded feedneck, you will need one of these:

http://www.paintballgateway.com/smloaders.html

or one of these if you have a side feed cocker:

http://www.paintballgateway.com/papulo.html

Those are pretty much all of your options at the moment.

Also, I am currently using a Palmers Pursuit T-stock (straight) and lovin' it.

Here is the link:

http://www.paintballgateway.com/stocks.html


PM me if you have any questions about the homemade feed tube.
__________________
Blaming guns for killing people is like blaming the keyboard for typos.
~anonymous

Stock Class Phantom for Sale
http://www.pbnation.com/showthread.php?t=3921799
pumpmonkey1 is offline   Reply With Quote
Old 04-02-2012, 09:17 PM #19
iamthanos
 
 
Join Date: Feb 2012
Quote:
Originally Posted by painter4life05 View Post
I apologize I have failed this thread
lol its all good man i aprieciate the help. So you think as long as i use my red springs out of my maddman kit i should be be good using un regulated co2? its a pump so there arent any pnues to mess up i would just have to keep up on my o rings.
iamthanos is offline   Reply With Quote
Old 04-02-2012, 09:18 PM #20
painter4life05
cixelsyd
 
painter4life05's Avatar
 
Join Date: Jun 2006
Location: An Attic
Annual Supporting Member
painter4life05 supports Cereal Killerz 2
painter4life05 donated to help Peyton Trent
Time for me to post something correct and relevant. I have the sanchez feed adapter posted above and it works great on stock press fit feedneck.
__________________
painter4life05 is offline   Reply With Quote
Old 04-02-2012, 09:55 PM #21
iamthanos
 
 
Join Date: Feb 2012
sweet thats the one i was going to get. But i milled my feedneck and put the cp ego 11 feed neck on there
iamthanos is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump