[herk8240]

you should just buy a lux

[Trigger Finger]

i would like a board that has siri.

[iboomalot]

Tool-less eye and detent maintence portal on the side of the gun

currently you have to use an allen head then a phillips head to clean the eyes.

what if the eyes board fit snug into a groove and the side plate was held on by a magnet?

Larger LED to see what mod the gun is in during sunlight.

[gamer565]

Magnet with PCB's are never a good ideal.

[iboomalot]

probly true just a thought

[soccerstud_2009]

reg size is perfect. oled board and fix the back cap magnet

[jhibby]

Ide like to see the grip fame raised into the stack a little more like the geo 2. And perhaps rechargable batteries to reduce weight. Oled is a must imo.

[saunders182]

Originally Posted by jhibby

Oled is a must imo.

Yes....

[ICdzBuff]

Kind of hard to add now. Everything that I would want has already been addressed.

Maybe go the eclipse route. Include a short and long reg (I personally LOVE the short reg).

4C standard.
OLED is nice, but not necessary

Efficiency is cool, but a quiet, smooth shot is better.
My .02

[crowntheking]

Give us a case that be can put in our bag like eclipse...one that wont get soggy with paint or fall apart cause uts made of paper

[ion_phantom]

Originally Posted by saunders182

Yes....

Why? If u play PSP/NPPL/rec why do u need to change ur gun settings?

[splatball101]

an oled like the '12 G6r would be nice. i agree the barrels need an update....but alot of guys use their own "preferred" barrel anyway. a decent case (like the gatwrap) with all guns would be nice also.

4C eyes really doesnt matter to me, i've never had a problem with the 2c ones.

[iboomalot]

my VIC is much much louder than my son's Axe that would be nice

[eatafetus]

Luxe style board, with Bob's voice for motivation.



better yet:

http://www.youtube.com/watch?v=35EluEa4QLM

[saunders182]

Originally Posted by ion_phantom

Why? If u play PSP/NPPL/rec why do u need to change ur gun settings?

I see your point and yes, set it and forget it is nice. When I play tournaments my marker is set to PSP but if I play rec I usually play 10 BPS capped. Is it super hard to change over using LED boards? No. Is it better and faster to just select load profile 1? Yes. Does having a OLED board take alot of guesswork out of bolt delay, dwell settings and such? IMO yes. But to each his own.

[norcal-baller]

you get what you pay for with the gun
the gun shoots amazing super smooth super accurate super efficient and super quiet nothing else neeeded

[MarkeyMark]

Originally Posted by Jinx18

as someone fairly new to bob long I am shocked that these basic items are not included but come with all planet eclipse, and macdev guns.

- Gun Case
- Lube
- Allen Keys
- Printed Paper manual

Is that too much to ask for?

Don't really care about keys or the Dow 55 myself considering its something I've always felt should be in your gear bag regardless.

Three barrel backs, would be nice though and if the backs were carbon fiber even better. Manual for the stock board and gun, oled, oring kit, make the engine a little quieter even though its a poppit so quieter only can go so far lol. 4c laser eyes and that's all the gun needs

[RedAkuma]

I would also like to see, something like the DYE eye pipe, to protect and be easier to clean broken paint out of the gun. I would settle for a piece of lexan under the circuit board between the body. I have found that paint, dow, ect tends to accumulate in the eye holes, then wedge itself onto the board, behind the eyes and cause issues. THANKS

[blank_3]

Originally Posted by jhibby

Ide like to see the grip fame raised into the stack a little more like the geo 2. And perhaps rechargable batteries to reduce weight. Oled is a must imo.

this

[specopsdeath2]

Originally Posted by RedAkuma

I would also like to see, something like the DYE eye pipe, to protect and be easier to clean broken paint out of the gun. I would settle for a piece of lexan under the circuit board between the body. I have found that paint, dow, ect tends to accumulate in the eye holes, then wedge itself onto the board, behind the eyes and cause issues. THANKS

i would not like this at all. eye pipes break a lot. Yes i know most of the time its user error by tightening the barrel too much, but even so. its just a cause for more problems in my eyes. there is a reason only one company is using them.

[xeese]

I don't remember if I posted this up or not but - longer grip frame to reg dimensions like the G6R. This should allow for a longer, smaller diameter engine and a smaller diameter body.

In addition to milling have a fully loaded version with a Tadao USB OLED board.