[Nemo128]

As much as I love the look and feel of this gun, why did they choose a threaded feedneck? In this price range, I'm surprised by the lack of an integrated clamping feedneck.

Any current users care to comment on it? I once dealt with a stripped feednack on a Timmy clone from a previous owner. Red loctite fixed that problem, but it was a problem.

[aznpride1150]

i replaced the one that came with the gun with a dangerous power feedneck, added a drop of blue locktite and ive been good for almost a yea without any problems

[xmc1146]

can you give me the link of who sells this now? i tried hostilecreation.com and there is nothing in their site.

[Nemo128]

I see it on their site. Dying to pick one up, torn between this and the Drone DX. I love the front grip design of this one.

[CA_Tectonics]

Originally Posted by xmc1146

can you give me the link of who sells this now? i tried hostilecreation.com and there is nothing in their site.

Hey xmc,

Hostile Creations no longer supports the Rogue (they still have their paint though ). Hostile Creations was the company that was going to release it but ran into an issue with the factory making them. The Tiawan-based factory decided to sell them directly under the name Hostile, Inc. Here is the site with the Rogue: http://www.hostileinc.com/

[Nemo128]

Ah, good to know the above. Makes me wonder, how is a buyer sure they would have a supportable marker in the future. =(

[rocker1337]

i know testers that were given the rogue to try out had all their kinks worked out and i know of several of these testers rogue's shoot like a dream! i dont know about the markers produced by hostile inc. they are supposed to have the updated parts to fix the kinks the testers had but i dont know anyone who can personally confirm this

[MachineKing]

A new company produces them now and supplies parts etc

[specopsdeath2]

Originally Posted by MachineKing

A new company produces them now and supplies parts etc

wrong.

A Taiwan factory was producing the rogue, which was designed by Hostile Creations. The testers were given the rogues to find all the kinks (which happened to be the bolt, reg, detents and asa). those were fixed and the gun shoots amazing (i pick mine up more then my luxe).

But due to circumstances I will not go into, Hostile Creations decided to not produce/sell the makers. The Taiwan factory, however, decided they were going to continue to make parts and sell the gun. I do not know if the Rogue+'s have all of the updated parts though, so be wary.

[xmc1146]

Originally Posted by specopsdeath2

wrong.

A Taiwan factory was producing the rogue, which was designed by Hostile Creations. The testers were given the rogues to find all the kinks (which happened to be the bolt, reg, detents and asa). those were fixed and the gun shoots amazing (i pick mine up more then my luxe).

But due to circumstances I will not go into, Hostile Creations decided to not produce/sell the makers. The Taiwan factory, however, decided they were going to continue to make parts and sell the gun. I do not know if the Rogue+'s have all of the updated parts though, so be wary.

just wondering what are the circumstances? also i looked on hostileinc site and only the ASA that made some improvement. what was the other issues with the gun though? you can PM me.

[specopsdeath2]

Originally Posted by xmc1146

just wondering what are the circumstances? also i looked on hostileinc site and only the ASA that made some improvement. what was the other issues with the gun though? you can PM me.

The only other problems were that the bolt was a bit too short, causing rollback and therefore chopping. The reg was not as consistent as they wanted so they changed it so it is much more consistent now. The Asa was changed because most people couldn't use HP tanks without blowing the pin o-ring, which now the new one is perfect and can work on any pressure.

[Zippin35]

I had a rogue and loved it! traded it away but was real sad to see it go. I will absolutely be following the new Rogue+ and if the kinks (should note that I never had a problem) get worked out and they come with the new parts I will be looking to get my hands back on one.

[@@@@a@@@@]

does any one have an oring diagram for the rouge

[specopsdeath2]

there is no diagram. I was setting one up a while ago but just too much stuff with school and life going on to do it.

what o-ring do you need to know the size of though

[@@@@a@@@@]

I really after them all. I bought a secound hand one and all the oring on the bolt had been taken of for some reason. I have fitted some and it works but just want to check

[Hogzilla88]

How does it compare to other spools on the market right now? Someone is offering me a trade on one, I want to try it out if it's any good.

[specopsdeath2]

i pick mine up just as much if not more then my luxe. i would deff take it over a clone vx, over a geo2 all day as well. always thought the geo2 was the lower of the high end spools (between clone, dms and luxe)

[Hogzilla88]

How does it compare in smooth/quietness, efficiency, etc?

[Ressurection]

Originally Posted by Hogzilla88

How does it compare in smooth/quietness, efficiency, etc?

Im curious about the efficiency as well have they improved that at all... I know chuck did a vid where he only got 5 pods on a 4000 fill....which is not to bueno

[Zippin35]

Originally Posted by Ressurection

Im curious about the efficiency as well have they improved that at all... I know chuck did a vid where he only got 5 pods on a 4000 fill....which is not to bueno

this

[basementN3k0]

last i heard from Will was that they didn't implement the changes to the bolt and other parts, so they didn't go forward with the official release.