 |
02-19-2012, 10:12 AM
|
#1
|
|
Join Date: Jan 2012
Location: On a boat
|
Disassembled nerve, and an o-ring dropped...HELP ME IDENTIFY
Bought a nerve that needed a new upperboard, I went to investigate to make sure that was the part I needed. Here is what I did, and what stage I think this o ring fell out
I disassembled the grip frame from the body and detached the harnesses...
I furthered inspected the upperboard, and solenoid (did not disassemble, and took the two solenoid screws out, and looked at the solenoid, this is where I suspect the o ring dropped, however it doesn't look like anything is missing, but I don't want to air it up and find out I have a leak...
I tried posting a picture, but it didn't work, here is my best description,
Round, not flat
Thin in width approximately 1.2 mm
Approximately 1/5" in length(diameter)
Black in color(usual)
On a quarter it makes washington look like he is wearing oversized pilot goggles... I know goofy detail, but I'm trying to be the most descriptive...
I believe it comes from the noid, but can't figure where it would go, please help!!!!
And thanks for your time!!!
|
|
|
|
02-19-2012, 11:45 AM
|
#2
|
|
Meow
Join Date: Dec 2002
Location: SE Michigan
|
may have tough luck getting people to respond here.. But if you like you can email me a pic
(my username)@aol.com
Also, if you need an upper board, I have a good one here. DONT remove the old upper form the noid if you dont know what you are doing!!
|
|
|
|
|
02-19-2012, 01:50 PM
|
#3
|
|
The Hobbit
Join Date: Oct 2005
Location: Western PA
|
from the sounds of it you are looking at a manifold O-ring.
If so that should tell you if it is the solenoid O-ring and where it goes. |
|
|
|
|
02-19-2012, 04:42 PM
|
#4
|
|
Meow
Join Date: Dec 2002
Location: SE Michigan
|
yup.. Noid plate O Ring. Goes between the noid and plate.
|
|
|
|
|
02-19-2012, 05:15 PM
|
#5
|
|
Join Date: Jan 2012
Location: On a boat
|
Greatness!!!!
 Thank you so much for your time, but I still need help
I Re-edited, the solenoid gasket isn't missing any o-rings... But the body side 2.5 circular, fits perfectly inside the mystery o-ring, and it's the same width, ken, could you maybe post the picture I sent you, if you have the time, thanks again guys, I feel like the biggest frustrated idiot
Last edited by NastE-imp : 02-19-2012 at 06:26 PM.
Reason: Stupid-proofing
|
|
|
|
|
02-20-2012, 06:52 AM
|
#6
|
|
Join Date: Jan 2012
Location: On a boat
|
I have tried posting a pic numerous times, Im going to end up with a photobucket account
|
|
|
|
|
02-20-2012, 02:49 PM
|
#7
|
|
The Hobbit
Join Date: Oct 2005
Location: Western PA
|
that would be the quickest and easiest way to help you out.
It takes just a few minutes to make a Photobucket account.
|
|
|
|
|
02-25-2012, 07:51 AM
|
#8
|
|
Join Date: Jan 2012
Location: On a boat
|
WOW, cant use photobucket on the iPad... Emailing then heading to the library today
|
|
|
|
|
02-27-2012, 09:34 AM
|
#9
|
|
Join Date: Jan 2012
Location: On a boat
|
picture!!!!
here is the mystery o ring, help me find where it belongs |
|
|
|
|
02-27-2012, 03:11 PM
|
#10
|
|
Meow
Join Date: Dec 2002
Location: SE Michigan
|
|
|
|
|
|
02-27-2012, 04:07 PM
|
#11
|
|
Join Date: Jan 2012
Location: On a boat
|
Thanks ken, im gonna read it now
|
|
|
|
|
02-27-2012, 04:26 PM
|
#12
|
|
Join Date: Jan 2012
Location: On a boat
|
It appears to be apart of the the spool valve in the solenoid. I'm taking it apart now to check, note: first time disassembling this Parker noid
|
|
|
|
|
02-29-2012, 05:05 PM
|
#13
|
|
vGisgo
Join Date: Apr 2006
Location: Livonia, MI
|
Looks like a 1x3mm ring. That means it came from the mani or the noid insert, not your solenoid spool.
__________________
Assumption is the mother of all **** ups.
"Thats a lot of Romans over there." "Yes but not one of them is Gisgo." Hannibal Barca and general Gisgo before the battle of Cannae in 216 BC.
"The league is a joke. I hate the "parity and the endless season. I hate these crappy franchises in Phoenix and Florida that dilute the talent pool. Too many teams make the playoffs and teams that use skill to produce stellar regular season records are forced to play mediocre teams who benefit from the looser playoff officiating. But most of all, I hate Gary Bettman who is the worst commissioner in any league.....ever". - bigolechet.
|
|
|
|
|
03-01-2012, 09:42 AM
|
#14
|
|
Join Date: Jan 2012
Location: On a boat
|
Noid insert it has to be, because like i said, the 1.2 fits perfecting inside it, and the other one, almost fits in it with out bending, I have someone else looking at it
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
