[homeskilly_antny]

does the pcv need to be lubed to create a proper seal?

[Uziel Gal]

No, that would mean removing the elbow, and that shouldn't be necessaery.

[homeskilly_antny]

installing the original fitting solved the problem. thanks for the help uziel. you rock.

[kmccrate]

I recently installed the soft touch kit in my geo, and now it fires a low velocity shot when i de-gas. I have the gr-2 upgrade and pvc and everything. I compared my soft touch kit with another and they appear to be identical. Any ideas guys?

by the way, I am using the LP spring and a tank with a myth reg, if that makes any difference

[Uziel Gal]

Possibly the vent hole in the new firing can isn't quite large enough.

Try the new bolt with your stock can and see if the issue goes away. If so, I would suggest contacting your nearest service centre to get the ST can exchanged for another one.

[Tz DomeCity]

I had a quick question. I just got another geo and I was doing my routine maintance and I saw it was missing the white plastic nipple on the s3. So I finished it up and aired it up and when I degassed it it didn't hold the pressure. Should I still try to get the nipple or you think I'll be good? And if so where would I order this?

[Uziel Gal]

Just to confirm, is the new marker a Geo or a Geo2? Did the marker fire as it was degassed?

[Tz DomeCity]

It is a geo+. It didn't discharged when I degassed it. That's why it seems weird to me. Should I order one either way?

[Uziel Gal]

Better safe than sorry - yes, I would order one. Contact your nearest Planet Eclipse service centre, and they should be able to supply you with one.

[Vale46]

To Mr. Nicky T.:
My pressure control valve broke, I was wondering if I can purchase it from you guys, but I can't find it on the PE site.

TIA

[Uziel Gal]

First up, try your nearest Planet Eclipse service centre: -

http://www.planeteclipse.com/site/service-centres/

[Vale46]

Originally Posted by Uziel Gal

First up, try your nearest Planet Eclipse service centre: -

http://www.planeteclipse.com/site/service-centres/

The San Diego number are no good.

[Uziel Gal]

Try googling the name of the service centre (if there isn't a link to their webpage already) and see if they have another number listed.

[mr Rockwell]

Still dont get it. Whats keeping PE from installing PCV on angled collars? I mean I have PCV in the frm and I really want that feaking angled collar but I can't buy it.

[jjrstr8killa]

Do any extra ones come with the spare parts kit?

[jdogg246]

I have a 2.1 with 2700 shots and it fires when it degasses. What would cause this?

[Uziel Gal]

Your PCV is in a different location - above the reg - but the issue would be the same; the PCV could be dirty, damaged or missing.

[PopSan]

on the Geo 2.1 ive cleaned/ check the PCV... its not damaged or dirty and my geo2.1 is still firing while i de-gas it... anything else i should check for... i also cleaned and re-lubed the reg and bolt

[jdpower]

^^^^ same here. Should I get a new PCV?

[Uziel Gal]

Have you cleaned the pocket and plug where the PCV is located, or just the PCV itself? If the latter, try cleaning the plug also. I would suggest cleaning the pocket as well, just in case there is any dirt there that could get transferred back on to PCV or plug.

Make sure that the pin hole vent behind the can o-rings isn't blocked.

[nickjarrett]

Ok I couldn't find help for this anywhere. I recently bought a used Geo 2(older one) with the new ASA and found out it was missing the PCV so I ordered one. Without the PCV, the Geo shoots great but fires when I degas it. With the PCV, it doesn't fire after degassing but it sputters when I shoot it fast. One balling it shoots fine, but walking it or ramping makes each other shot drop. I would love to have the PCV and the Geo shoot great.