Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-05-2012, 04:26 PM #1
Kope606
 
 
Kope606's Avatar
 
Join Date: Jan 2012
Location: Zoo Town
Kope606 has achieved Level 1 in PbNation Pursuit
Azodin Reg and ZERO setup

Hey guys i thought I'd post what i found to be the best settings on the azodin OEM reg and the ZeRo system.

This is on a Zenith.

on the regulator 4.5 full turns out (counter-clockwise) from soft bottom out. This will give you approximately 250psi output. (as per the manual each quarter turn is equal to 25psi) so adjust as needed.

You need to check your gun with a chrono before play!
I usually tweak the reg till im shooting 280FPS and use the main spring tension to set to 295 FPS.

I contacted Azodin directly for the ZeRo factory settings.
With the set screw flush with the front of the ZeRo system 3 full turns in (clockwise). THIS IS THE SETTING FOR HPA.

Hope this helps anyone that did a full tear down and needs to re set everything.
Kope606 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-22-2012, 11:20 AM #2
AR15 guy
I'm not agg
 
Join Date: Sep 2005
Location: Barboursville, WV
AR15 guy is a Supporting Member
I used this setting on my Zenith and it seems to work well.
__________________
Old Feedback! 58+ 0-
Azodin Zenith- Ndz feedneck, hush bolt cp on/off, fasta w/exalt speed feed.
Azodin Kaos D- ndz feedneck, single frame
ALL MY GEAR IS FOR SALE
AR15 guy is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump