[skra27]

hey guys just wondering if i can shoot reballs with my luxe and g6r or will it mess my guns up?

we cant shoot over 240

[Ken448]

just make sure the reballs are clean and youll have no issues. Id get a barrel I dont care much for just in case

[skra27]

ok thanks

[Porkins McClarin]

also sometimes the loader will effect the performance of reballs, i know my rotor HATES reballs, bu my halo v35 doesnt have a problem at all with em.

[Chancho9370]

Yeah rotors hate reballs and my v35 only worked with them in the LOWEsT speed...but it still jammed....on my z2 loader..it really didnt jam at all so....

[i8somepie]

The biggest thing is to have clean reballs, like mentioned above^.

It'll affect everything from the way your loader feeds them to the way they shoot. My prophecy and rotor won't move dirty reballs at all, but once clean my prophecy doesn't have many issues but the rotor is still finicky.

They are dirty, a cheap barrel may help prevent wear in the bore.

[pbcustom98]

why do the hoppers have a hard time with them? are they bigger/smaller?

[skra27]

well it sounds like im bringing a rotor and a prophecy.

[i8somepie]

Originally Posted by pbcustom98

why do the hoppers have a hard time with them? are they bigger/smaller?

Mine have generally been smaller than a regular paintball, by about 0.10". Plus they are made of a rubber so they tend to rub more and grip on to surfaces more so than paint.

Originally Posted by skra27

well it sounds like im bringing a rotor and a prophecy.

I'd take the prophecy over the rotor unless you like to shark fin a lot. Honestly, my best loader for reballs has been my Eggy2. So eVLutions, Pinokios, V-Maxs, and other impeller fed loaders are probably your best bet.

[haynboy8223]

You can shoot reballs out of any gun! Just make sure they are clean and some need to be lightly lubed.

[boobie817]

Buy a cheap barrel that you don't care if it gets messed up. Reballs can be dirty and scratch your barrel. My rotor doesn't have problems with them. Then again I only tech guns after maintenance. I'm not ripping. Lol

[skra27]

im not bringing reballs im going to a place and i get unlimited of them and i dont have money to buy a barrel lol

[i8somepie]

I use a cheap 8" cocker barrel. Maybe worth $10 bucks, if that.

[azhector]

i heard they wear down your breech a bit, but i dont know that for sure

[i8somepie]

If there is grit and debris on the reballs, then there is the possibility that some could get caught in there and wear the breach some. I haven't had any but I don't use my reballs too often other than for teching.

[Shemp 5]

never had a problem with reballs. pick up a fasta for a hopper(rotors and v1/2 propecys have trouble), halos will work ok, still jamming tho. reballs have never scratched my barrel. you'll be fine

[skra27]

hey shemp were you at clp lat thurs?

[Shemp 5]

yezzir

[p8ntballr68059]

best loader for reballs is the pinokio or even the old revy. ive heard good things about the fasta also but no experience with it myself

[Paper_Cut]

Originally Posted by azhector

i heard they wear down your breech a bit, but i dont know that for sure

Your bolt does more damage than a reball.