- Airgun Designs Valve ( completely rebuilt )
- Dry Film Lubricant Coating applied to internals
- Right feed factory pump milled body w/ shortened feed neck
- AGD factory pump milled rail
- All American Barrel
- AGD intelliframe*
- CP on/off ASA
- Custom made gas through foregrip
- Pump Kit
- Refinished in our Cerakote " bone collector " pattern (1 of 1)
This Automag pump was built and tuned by Georgia Gunsmithing and is ready to hit the field. The valve has been rebuilt and coated with microslick. The bolt spring and wave spring have been balanced to provide a VERY smooth, short, and light pump stroke. The self lubricating Cerakote finish also helps smooth the pump stroke which we measured at just over 1 pound with the return spring! The pump arm has been heat treated and tuned so it will not bind or stick against the bolt. The body rail and pump adapter has our " melt job " where we smooth the sharp edges. We also contoured them to flow better with the Foregrip lines. The finish on the marker is our custom Cerakote " bone collector " pattern and is 1 of 1 as we will never do another in this color combo. We highly suggest taking the time to closely look at this marker and you will see the attention to detail that was put into this marker. We built it to be the featured marker on our new Airsmithing website and it has never see the field. I can provide more pictures or even video on request. If you have any questions please feel free to contact me anytime I'm happy to help. Thank you for your time and have a great day.
$450.00 shipped and insured. Trades for other pumps also considered.