[NoX13]

Im posting to see if anyone knows about the sp1 (or even g1 since pretty much same marker) breach..

more specificly would like to know if it is possible to take the breack apart, if its even possible and if so how to go about it..

if you look at the breach (pictured below) you see the line just in the middle...

[[NA]WARLORD]

No, it does not come apart. Even if you cut it off, you would have to cut it in the fashion of a Vibe/Ion XE (slightly longer) so you can retain the hole that holds the vertical asa in place so you can reattach your reg.

Or you could buy an Ion trigger frame, mod the body with a dremel and buy an Ion XE conversion kit or a Vibe Blackheart conversion (the old one) and convert it. This lightens it up considerably and if you go the Ion XE way, opens you up to a ton of aftermarket goodies

My Old Ion/SP-1 Conversion

[NoX13]

Originally Posted by [NA]WARLORD

No, it does not come apart. Even if you cut it off, you would have to cut it in the fashion of a Vibe/Ion XE (slightly longer) so you can retain the hole that holds the vertical asa in place so you can reattach your reg.

Or you could buy an Ion trigger frame, mod the body with a dremel and buy an Ion XE conversion kit or a Vibe Blackheart conversion (the old one) and convert it. This lightens it up considerably and if you go the Ion XE way, opens you up to a ton of aftermarket goodies

My Old Ion/SP-1 Conversion

Thanks for the info man...

Im not really looking to use the whole breach section or really mod that, Im basicly looking to use the front half of the tube itself..

extended the body of my sp1 and looking to extend the breach section itself where the barrel just goes through to the front of the body..making it look like one piece ..

[[NA]WARLORD]

I thought you might be trying to remove it to shave some weight.

[NoX13]

Originally Posted by [NA]WARLORD

I thought you might be trying to remove it to shave some weight.

I also shoot a shoebox shocker.. weight has no effect on me..lol