demon question...

iSkiM-321 · 02-07-2012, 10:28 AM

im about to trade for a demon,

i was looking around oring monkey for an oring kit but was unable to locate one.....is this due to the marker being so new? where can i find a kit?

ive read the reviews and am currious on some more input on the trigger......do the majority of people like it?

Mattcar · 02-07-2012, 11:27 AM

Quote:

Originally Posted by iSkiM-321

im about to trade for a demon,

i was looking around oring monkey for an oring kit but was unable to locate one.....is this due to the marker being so new? where can i find a kit?

ive read the reviews and am currious on some more input on the trigger......do the majority of people like it?

I like the trigger, but for the oring, I was told the demon works with British Orings, and the size of those is not the same as the US orings, so so should get a oring kit from a vanguard rep

overweightangel275 · 02-07-2012, 11:45 AM

I will have kits shortly.

iSkiM-321 · 02-07-2012, 11:52 AM

ok cool thanks,

ive read mixed reviews on the trigger it deffently looks diffrent i gess ill just have to wait and see how it feels

thanks for the info

overweightangel275 · 02-07-2012, 11:58 AM

The trigger can be adjusted a number of ways. Removing the trigger spring is on way. Pm me and I can assist you if you need advice or help

zyxin · 02-08-2012, 08:07 AM

I didn't like the trigger at first, like overweightangel said the triggerspring can be removed so the trigger becomes perfect. If I were you I wouldn't worry about the trigger..

g_t06 · 02-09-2012, 03:35 PM

I just got a demon and the trigger is alittle to heavy for me. How do I go about removing the trigger spring? I haven't looked much into it

brookie · 02-09-2012, 03:52 PM

If you remove the grip frame from the body, its easiest to unplug the noid and eyes from the board before hand. You will see a plate just above the trigger held down by 2 screws, if you remove the plate you can take the spring out.

Hope this helps

MstrKey · 02-10-2012, 03:38 PM

You can also just trim the spring down a bit to make it softer, or out right replace it with a softer spring.

First There89 · 02-10-2012, 08:37 PM

i got a demon with the spring removed and i love it

g_t06 · 02-11-2012, 08:00 AM

Removed my spring last night. Amazing!! I'd advise any demon owner to do the same! No more heavy trigger. Not to soft not to heavy, perfect.

g_t06 · 02-11-2012, 08:02 AM

[quote="brookie"]If you remove the grip frame from the body, its easiest to unplug the noid and eyes from the board before hand. You will see a plate just above the trigger held down by 2 screws, if you remove the plate you can take the spring out.

Hope this helps.

That's exactly what I did besides unplugging the noid from the board haha to lazy but thanks for the great advice.
And to anybody whose does remove there spring, be cautious when putting your body to frame back together, it's very easy to pinch your noid eyes

overweightangel275 · 02-11-2012, 08:58 PM

Yes be very careful of the wires as you reassemble the frame. Pinching them could be a costly mistake. Removing the spring is simple to do as stated above. Removing the magnet can be trickier, but usually the pop right out.

krazynuttz23 · 02-13-2012, 09:46 PM

removed the spring and trigger now feels magnificent!