Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-10-2012, 08:39 PM #1
First There89
Triple OG
 
First There89's Avatar
 
Join Date: Mar 2011
Location: earth
First There89 is for the Gunfight
First There89 posts videos on PbNation
First There89 plays in the APPA D5 division
First There89 has achieved Level 2 in PbNation Pursuit
First There89 has achieved Level 3 in PbNation Pursuit
small demon problem

just got the gun screwed in my SLP tank and shot fine once i turned up the reg then switched over to a SMP reg and tried to shoot it and i got one shot that came out seeming real hot then next one wouldnt come out of barrel then it just wouldnt shoot so i tried turning up pressure until it was maxed out then it started leaking so i put it back in. i sent it off to get it annodized and tuned by shootnpoo so it will be fixed but was curious what coulda been wrong
__________________
HUGE GEAR BAG CLEAN OUT PRO JERSEYS ETC F/S/T http://www.pbnation.com/showthread.php?t=3770896

JT PROFLEX( WHITE BOTTOMS, SCARFACE THEMED) AND SLY PROFITS RETINA LIMITED EDITION http://www.pbnation.com/showthread.php?t=3783456

MISC ITEMS FOR SALE http://www.pbnation.com/showthread.p...0#post74742100


AIR SYSTEM FOR SALE: http://www.pbnation.com/showthread.php?t=3781972
First There89 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-10-2012, 11:55 PM #2
Reaper (ACI)
We're Weird
 
Reaper (ACI)'s Avatar
 
Join Date: Apr 2008
Location: Beaverton, OR
Reaper (ACI) works for a Paintball manufacturer
Reaper (ACI) donated to help Peyton Trent
Reaper (ACI) is for the Gunfight
Reaper (ACI) is for the Gunfight
Quote:
Originally Posted by First There89 View Post
just got the gun screwed in my SLP tank and shot fine once i turned up the reg then switched over to a SMP reg and tried to shoot it and i got one shot that came out seeming real hot then next one wouldnt come out of barrel then it just wouldnt shoot so i tried turning up pressure until it was maxed out then it started leaking so i put it back in. i sent it off to get it annodized and tuned by shootnpoo so it will be fixed but was curious what coulda been wrong
The SLP regulator. I know they were tested with that reg, but I don't recall if it was recommended or not...I think not. I believe that's why the SMP 550 came to be.
__________________
VANGUARD CERTIFIED MASTER TECH
Dead Box Sports
West Coast Parts, Service, Warranty, and Distribution
www.deadboxsports.com

I have LEGO Paintballer Mini Figs
Reaper (ACI) is offline   Reply With Quote
Old 02-11-2012, 11:43 AM #3
rjdeyoung
LLPaintball.com
 
rjdeyoung's Avatar
 
Join Date: Mar 2007
Location: Minneapolis
Annual Supporting Member
rjdeyoung owns a Planet Eclipse Geo
rjdeyoung is for the Gunfight
rjdeyoung plays in the APPA D4 division
rjdeyoung has achieved Level 3 in PbNation Pursuit
rjdeyoung owns a Planet Eclipse GSL
The SLP reg is too low of pressure. It maybe ok to shoot it one shot at a time like you're chronoing but full on ramp or sustained rate of fire and it pretty much dies as far as shoot down and low FPS. This is what I have personally experienced with my Demon and my SLP reg...plus Eric (shootnpoo) has mentioned in a few other threads that the SMP/midpressure or highpressure is recommended.
rjdeyoung is offline   Reply With Quote
Old 02-11-2012, 08:56 PM #4
overweightangel275
Vanguard East Coast
 
overweightangel275's Avatar
 
Join Date: Feb 2005
Location: Stoughton MA
overweightangel275 works for a Paintball manufacturer
overweightangel275 plays in the PSP
overweightangel275 is for the Gunfight
overweightangel275 is for the Gunfight
Quote:
Originally Posted by rjdeyoung View Post
The SLP reg is too low of pressure. It maybe ok to shoot it one shot at a time like you're chronoing but full on ramp or sustained rate of fire and it pretty much dies as far as shoot down and low FPS. This is what I have personally experienced with my Demon and my SLP reg...plus Eric (shootnpoo) has mentioned in a few other threads that the SMP/midpressure or highpressure is recommended.
This is correct. Mid to high pressure works best.
__________________
NE Avalanche
-Koker #37
East Coast Vanguard Marker Support
Looking for Demon and Creed Parts/Markers
http://www.vanguardpaintballusane.com
mike@vanguardpaintballusa.com
overweightangel275 is offline   Reply With Quote
Old 02-12-2012, 06:46 PM #5
Sick420
Hitting the Snake Fast!
 
Sick420's Avatar
 
Join Date: May 2010
Location: *714*OC
I think it could be the QEV Diaphram with the changes of internal pressure it could have offset it. As it is not letting cycle by dumping out the air through the QEV Or something like that.
__________________
AggressiveSports.net - MACDEV U.S. Sales & Warranty Center
https://www.facebook.com/AggressiveSportsDistribution
Sick420 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump