[cybermaniac15]

Just got it, had a slight leak between body and frame. I rebuilt the whole engine, and it's still leaking...

[SmartWorrPartsPlayer]

First, lower your HPR 1/4 Turn and see if it stops.

If it doesn't pull your Engine out and put a generous amount of lube on the two Green 020 O-ring that are on the Plunger.

[cybermaniac15]

Originally Posted by SmartWorrPartsPlayer

First, lower your HPR 1/4 Turn and see if it stops.

If it doesn't pull your Engine out and put a generous amount of lube on the two Green 020 O-ring that are on the Plunger.

Went away!!! Thanks! Lets hope when I shoot it tomorrow it behaves... Pressure testers will also hopefully come tomorrow.

[SmartWorrPartsPlayer]

Usually if you over pressurize the solenoid it will start venting to prevent any serious damage.

Glad to hear it's working!

[cybermaniac15]

I'm returning it...
If its not leaking, it's not shooting...
It only shoots when it leaks...
I'm gonna try an find another one.

[SmartWorrPartsPlayer]

So when it doesn't leak... It doesn't shoot

And when it does leak it does shoot?

[Paintball_Kid_32]

i have the nt 10 no problems with it