[Fallinher0]

Just got a CCM S6 in the mail and the previous owner claims to have never used the stock reg. It looks brand new with no wear.

The issue: When I go to air up the gun it wont shoot... but if I throw ANY other reg on the gun it works... I took it apart to briefly inspect it and it looks fine.. its there something I should be looking for?

[drgonzo]

Does the chamber gas up?

[PureInsanity]

is the reg turned off or have you fiddled with the adjustment screw?

[Fallinher0]

I have messed with the adjustment screw with no results. I cock and fire but there is no air coming out.

[ridebmx211]

i would take it apart, and grease the orings, then set the screw flush and try again. its pretty simple to take apart

[Castro #66]

Talk to CCM. They'll get you set up.

Everyone else: please don't make me infract you for BST. You all know how to use PM's.

[Fallinher0]

There is no air coming out of the top of the reg into the body...

[Fallinher0]

I followed the breakdown and reassembly video on youtube to make sure I was doing something stupid and I had no luck.. Looks like I will be calling CCM tomorrow.

[bokyo102]

just maybe.... have you tried taking the macroline fitting out and check if its ok..

[CCM CHICK]

Originally Posted by Fallinher0

I followed the breakdown and reassembly video on youtube to make sure I was doing something stupid and I had no luck.. Looks like I will be calling CCM tomorrow.

Call us! We’ll be more than happy to try and help.
M-F 7am to 3:30pm PST
1-877-412-6850

[Fallinher0]

Originally Posted by bokyo102

just maybe.... have you tried taking the macroline fitting out and check if its ok..

Yes I swapped for another with no luck.

Originally Posted by CCM CHICK

Call us! We’ll be more than happy to try and help.
M-F 7am to 3:30pm PST
1-877-412-6850

Awesome. I will give you guys a call tomorrow!