Originally Posted by Schuttsr1
Well the First strike mags come with two difftent springs the red ones are for the first strike rounds they tend to crush regular paint. So you need the silver springs if your shooting regular balls.
From the sounds of it, if you are still having problems with chop when feeding through the hopper port it most likely isnt the spring and some thing internal.
Is it low grade of high grade paint your having problems with?
Also if you adjust your velocity down do you still have breaks?
Other than that the only real thing to watch is the detents and to make sure they dont have any sharp edges. If the paint is soft you may want to swap detents with the soft touch ones. They arent as stiff at the FS ones.
Hopefully this helps a bit.
I was shooting evil and valken.
i have the red spring in one mag, and the silver spring in another, and they both smash the balls.
It is not the detents, because the balls are breaking as they go into the chamber.