[xGrasby21]

the lpr pin got stuck in the wrong hole. the 1st hole not middle one, how can i get it out?..

[jason_vanguard]

Originally Posted by xGrasby21

the lpr pin got stuck in the wrong hole. the 1st hole not middle one, how can i get it out?..

Hi,
Just take a pair of pliers and very gently pull the pin out, then re position your lpr to the correct hole and reinsert.

[SHOOTNPOO]

^ true. I pmd you the same responce.

[xGrasby21]

Originally Posted by jason_vanguard

Hi,
Just take a pair of pliers and very gently pull the pin out, then re position your lpr to the correct hole and reinsert.

its in the first hole, where everything fits, the head and all. it pretty farr down there.... :/

[SHOOTNPOO]

Take trigger frame off and turn gun over and tap on your hand pretty hard also pushing and pulling on the LPR body at same time to loosen the pin from having any tension against it. Hit on the palm of your hand this may get the pin out far enough to grab with pliers

[xGrasby21]

Originally Posted by SHOOTNPOO

Take trigger frame off and turn gun over and tap on your hand pretty hard also pushing and pulling on the LPR body at same time to loosen the pin from having any tension against it. Hit on the palm of your hand this may get the pin out far enough to grab with pliers

still cant get it man, :/

[xGrasby21]

Originally Posted by jason_vanguard

Hi,
Just take a pair of pliers and very gently pull the pin out, then re position your lpr to the correct hole and reinsert.

any more help? its like jammed in there. will not come out what so ever...

[jason_vanguard]

Originally Posted by xGrasby21

any more help? its like jammed in there. will not come out what so ever...

Can you take a picture and post it, I'm getting confused as to why you are struggling with it.

[xGrasby21]

Originally Posted by jason_vanguard

Can you take a picture and post it, I'm getting confused as to why you are struggling with it.

got it after banging on it for an hour in a half, thank you guys..

but now its leaking near the solenoid, i changed the lpr orings, and the rammer

[SHOOTNPOO]

Did you use Metric 15x 2 orings
Not 2, 015 orings?
The lpr body orings will make the noid leak.

[xGrasby21]

Originally Posted by SHOOTNPOO

Did you use Metric 15x 2 orings
Not 2, 015 orings?
The lpr body orings will make the noid leak.

uhhh yaaa i think man, i have no oring chart :/ or sizes.

[xGrasby21]

Originally Posted by SHOOTNPOO

Did you use Metric 15x 2 orings
Not 2, 015 orings?
The lpr body orings will make the noid leak.

could it be the valve body orings? how do you remove it

[SHOOTNPOO]

It could be a few things but need to know which hole the on the noid I's leaking from.
Also the LPR body orings are a crucial part of the pressure going into the noid.

[xGrasby21]

Originally Posted by SHOOTNPOO

It could be a few things but need to know which hole the on the noid I's leaking from.
Also the LPR body orings are a crucial part of the pressure going into the noid.

uhhh i took it all apart, and its coming from the farthest hole to the left , farthest from where the eire goes in. and uhh i didnt see a valve body in there when i took it all apart, just the whit piece that looks delrin.

[SHOOTNPOO]

Have you watched any of the tech videos? These are so helpful to you to repair your marker or when we are explaining thing to repair to you.