Lpr question?

Papa B · 05-21-2011, 11:51 AM

I just got a Defiant 2 off the nation and it did not come with the lpr pressure tester. How could I best set it with out the tester?
Thanks!

THE Hulk · 05-22-2011, 11:15 AM

Call Bob Long is going to be your easiest and best bet.

Papa B · 05-22-2011, 11:21 AM

Quote:

Originally Posted by THE Hulk

Call Bob Long is going to be your easiest and best bet.

Yeah I contacted Blast on Facebook. Just waiting for a reply.

AlmightyRuler · 05-22-2011, 04:13 PM

Call them.

Don't they come with gauges?

Papa B · 05-22-2011, 04:15 PM

Quote:

Originally Posted by AlmightyRuler

Call them.

Don't they come with gauges?

Mine didn't nor do have an area to put one.

mecoffeenut · 06-13-2011, 08:57 PM

If and when you get a gauge, you take the ram out and the gauge tester screws into it's place. Once you have your lpr set you should have to set it again unless you disassemble the lpr.

thecockergod · 01-09-2012, 06:44 PM

Quick set on d2 lpr. Air up your gun, cycle it with no paint. Turn down lpr to start. Watch the bolt in the breech. Turn it up till it clears the breech, firing every 1/4 turn, then about a half turn extra. Not perfect, but it will work. Watch it, though. The stock lpr is known to creep! Keep track of where you set it. A small reference mark with a sharpie marker works.