[Rockwings]

Here's my superbolt.
It's equipped with a chrome slider, vendetta deluxe pump kit, Complete ccm internals, cp reg, cp on/off, and cp barrel.
My next thing to do with it is drill out the back block so it accepts standard cocker bolts, dremel (carefully) the body where the pump arm rubs, and bore out the stock barrel for freaks, and using brass inserts.
If there's anything else you think I should add, or if you like her, then just post here.

[EvilAuthorityX]

dont change the bolt, ive found that most of my smoother guns have had aluminum bolts. plus the twist lock bolt keeps the gun more low profile. if you want to change out the bolt for delrin sanchez makes a twistlock delrin bolt

[Rockwings]

Really? I didn't know that. I'll try to find one

[ridebmx211]

you could get a roller sear for you trigger

[YeloSno]

Sanchez bolt
Tungsten hammer
Dr Gonzo's Hammer slug on the end of the cocking rod (get two of them)
Roller sear
AKA tornado valve

That's how I roll, at least. I'm new to the tungsten hammer, but with the ****ty lightweight slotted hammer that's in it, the pump stroke is already SUPER smooth.

[moscowdc9]

if u want an at tap the pump arm and buy a GAT auto trigger but other than that listen to yello snow