 |
|
09-04-2011, 05:57 PM
|
#22
|
|
Join Date: Oct 2004
Location: AZ, USA
|
As someone else pointed out, you should add NiZn.
AA are 1.6V, 9v don't currently exist. Capable of high discharge, rechargeable, no memory, will self-discharge very little.
I no longer use Alkaline AA's due to NiZn. They will provide equal or superior performance to Alkaline, while saving you money by the 4th recharge.
The HiPO NiMH 9v's (9.6v, 230-250 MaH) are also fantastic to replace 9V. Just make sure you're getting the good ones, not the cheasy Java (170 MaH although they are the proper 9.6v), or 7.2 or 8.4v that are usually sold in stores.
Last edited by tlmiller : 09-04-2011 at 05:59 PM.
|
|
|
10-16-2011, 11:30 PM
|
#23
|
|
|
Just and FYI,
I used a voltage tester to test brand new Alkaline 9v batteries.
I tested multiple brands including the cheap 99cent store type.
The battery Brand that had the most voltage to start:
Fiji with an out of the pack 9.98 Volts
Energizer had 9.2 out of the pack almost every time.
I tested the self discharge voltage at about 3 months: Fiji 9.51 (best voltage)
The best type of battery is one that can be recharged though (Nimh). You save money. Especially if you charge it somewhere other than home, free electricity rules! (no matter how little the use!)
__________________
<<<<<<<PAINTBALL JUNKY>>>>>>>
Last edited by CovertAssassin : 10-16-2011 at 11:35 PM.
|
|
|
10-23-2011, 12:27 PM
|
#24
|
|
Join Date: Dec 2001
Location: OKC , Okla
|
been using the ipowerus li-poly batteries for 2years
kinda expensive but 500 mah on a 9v is great and 8.4v not 7.2 so it powers guns and hoppers.
http://www.batteryjunction.com/ipowe...hrg-combo.html
__________________
Play under the name Panther on the field,
Been playing PB since late 1980s off and on.
VISIT www.expandinghealthcare.com for 30%-50% off dental costs with Aetna for $9.95/month which includes entire family
Last edited by iboomalot : 10-23-2011 at 12:32 PM.
|
|
|
12-06-2011, 12:11 AM
|
#25
|
|
Impact-zach
|
Rotors are the best on batteries
|
|
|
12-06-2011, 01:16 PM
|
#26
|
|
F**k S**t Up...
Join Date: Apr 2010
Location: Ontario, Canada
|
Quote:
Originally Posted by zachyachimec
Rotors are the best on batteries
|
this is not about battery efficiency but about batteries themselves.. and you can't really say best on batteries cuz someone will come by and say that a pinokio will run 2 9v's through 36 cases.. considering a pinokio uses 9v's and a rotor uses AA's its like comparing apples and oranges when they're in a banana suit..
__________________
2013 Vanguard Demon, SFT Shocker (Hybrid frame, Eigenbolt and Virtue Board), Threshold (APE board), Oracle pump
ninja'd Spire, ninja'd Rotor, Ninja Air 68/45, ninja'd Dye i4's,
Demon Horde Citrus Connection #99
|
|
|
12-27-2011, 09:58 AM
|
#27
|
|
Join Date: Sep 2005
Location: westville illinois
|
|
|
|
02-19-2012, 05:14 PM
|
#28
|
|
|
Sanyo Eneloop
I know this is an old thread but figure people will still check it out.
If you you use AA or AAA batteries in your hopper I suggest you check out Sanyo Eneploop. they are the only rechargeable batteries that I know of that can sit for 3 years and still maintain 75% of its power. They are considered the best rechargeable at least if they meet your power requirements. I use them in all my remotes and flashlights. They don't yet make a 9V so I use Tenergy in my gun and hopper. Sanyo has recently come out with a new battery for high consumption called Eneloop XX but I have yet to try it.
|
|
|
07-08-2012, 01:48 AM
|
#29
|
|
Join Date: Jul 2012
Location: oklahoma
|
Interseting
|
|
|
07-08-2012, 01:49 AM
|
#30
|
|
Join Date: Jul 2012
Location: oklahoma
|
I always use the duracell aa
|
|
|
08-08-2012, 10:06 AM
|
#31
|
|
|
thanks for all of this
|
|
|
10-02-2012, 05:29 PM
|
#32
|
|
Join Date: Sep 2012
Location: New Jersey
|
Great helpful info
|
|
|
10-02-2012, 10:32 PM
|
#33
|
|
Join Date: Feb 2010
Location: N Ga
|
If anyone is curious, you do not need to have a sophisticated LVC or charge circuit for LiPos. I run them. For all the 9v applications I use 3s(11.1v nominal) with a light resistor. For the 18v packs i just use a 5s. I build my own packs and circuits, I don't buy them. What I use is a simple low voltage indicator light or buzzer. Set it at 3.3 volts and when you hear/see the alarm you still have a while to play and not worry about destroying the battery. If you are really worried about it you can use a kill switch triggered when the LVC sends its alert. Charging is also an absolute breeze. A simple JST plug running to a simple 2/3s LiPo balance charger. Plug it in, when it turns green unplug it. I mount a charger jack that is accessible without having to pull the batteries. Nice thing about the charger I use is that it can be powered by anything from a USB port to a car alternator to a large lantern battery. It means you'll always be able to top it off.
Every LiPo available will have a discharge rate far higher than anything a hopper can use so you don't need to worry about getting weak ones. They are drastically lighter, last significantly longer and greatly improve break out speed. A normal 9v will drop to 6 volts and lower when a load is placed on them. An 11.1 LiPo will not have drop off at all and won't choke the motor.
I'm able to build plug and play LiPo systems for less than $30 including the charger, cells, LVC, balance plug and power leads.
|
|
|
01-24-2013, 08:17 PM
|
#35
|
|
|
I race rc and id put lipo's in everything if I could.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|