Little confused by the question.
The Azodin KP+ is in essence the standard KP with the Blitz/Zenith trigger frame, in addition to the micro-switch based Auto Trigger.
Just as you would with the Blitz/Zenith, you will need a battery. You will need to turn the board on to fire in standard pump mode. You will need to turn the board on to fire with the Auto-Trigger.
From memory there are three modes:
Standard Pump Mode - Pump then pull trigger to fire
Standard Auto Trigger Mode - Pump then pull trigger, or hold trigger while pumping to fire
Auto Trigger Mode - Upon completion of pump stroke...it fires
When in the standard auto trigger mode, you can fire as you would in the standard pump mode.
From what I have seen/heard from the locals with the newer KP's[With Azodin reg], the markers shoot great. Still has a bit of a bark...but it is a lot quieter than my first generation was.
Ugh...lured into a pseudo-necropost! >.>
Last edited by CFCrew : 02-23-2012 at 10:58 PM.