Dye Nt Problems, HELP

adamnewff · 12-16-2011, 10:42 AM

Hey guys, Ive got a original nt that Ive been using for almost 2 years, its has ALOT of paint thru it.. Ive only recently been having trouble with it sence I swapped out the stock board that fried for a virtue.

My question pretty much is, What dwell setting to use for virtue.

I was told 8. but it does not even shoot on 8...at 185 hpr. it only cycles at 18 and above.. is that too high? is there something else I should be looking for?

Thanks alot guys/

SmartWorrPartsPlayer · 12-16-2011, 11:26 AM

Virtue Boards are finicky like that.
Dwell is set by, .25ms increments.

nick425 · 12-16-2011, 11:26 AM

Is it a virtue redefined. If so u belive dwell of 8 is actually 32 because the board counts .25 ms instead of 1 ms

I don't have the manual in front of me but I know people have asked this before

Paint_hore · 12-16-2011, 02:36 PM

try searching next time, its been covered about 100 times.

adamnewff · 12-16-2011, 06:00 PM

Quote:

Originally Posted by Paint_hore

try searching next time, its been covered about 100 times.

no