Axe with a wierd problem.

Taxarod · 11-29-2011, 06:54 PM

Hello,

I need your help to figure this out.

This is my current set up.

Axe
Prophecy v2
Crossfire 45/45 Low Pressure

Saturday I was playing in a night game, and its the first time it happens to me that, my axe will not shoot at certain possitions, for example, if I tilt it sideways it will shoot, but if I hold it up straight in a common shooting possition it won't shoot. If I point it up it will shoot, if Its pointing downwards it doesn't shoot.

Things ive tried so far:
1. Replacing the battery
2. Cleaning the inside
3. Cleaning the bolt and re lubing it.

I will have a replacement board in a couple days, I will replace it and see if it fixes it, if you guys have any other possible solution, please, let me know.

JTBaller203 · 11-30-2011, 12:16 PM

might have something to do with the wiring. if that new board doesnt help send it in to get it fixed.

shocker4life03 · 11-30-2011, 12:43 PM

are your ball detents in good shape? if they arent the ball could be rolling out of the eyes. which explains why pointing it up would make it shoot, it would roll back to the bolt and sit there.

**Simon** · 11-30-2011, 01:35 PM

It's the activation point of the trigger, you have it set too close to the pull or release point of the microswitch. Tweak it to have a bit more travel in which ever direction is needed, and you should be good.

Taxarod · 11-30-2011, 02:07 PM

Hmm, I'll check the detents.
Thanks for the answer @shocker4life03

I'll also check that @ Simon

Board should be here already, I need to go pick it up @JTBaller203

Thanks for all the answers, I'll try to get this sorted soon.

sdzell18 · 11-30-2011, 04:01 PM

Check that your grip frame screws are tight too

Taxarod · 12-05-2011, 08:49 PM

UPDATE: I got the package in of the board but it turned out that they sent me the wrong thing... I called them and now they are working on sending me a new board instead of a invert mini battery harness...

I also took it apart, cleaned the eyes, cleaned everything I could possibly and relubed the bolt and spring.

As soon as I get the board, I'll run to test it.

dose55 · 12-06-2011, 01:05 PM

It's the trigger... Do what Simon said and you'll be fine

NEballer72 · 12-08-2011, 12:39 PM

this sounds like a weird problem but what Simon said does sound correct. and about the ball detents if he pointed down the ball would roll out make sure your battery is in the all the way and none of the wires are getting pinched. hope it all works out