[koolaid335]

so my nt got it today didnt have alot of air inbetween 0-1000 psi in the tank
is it possible that the nt can leak out of the back of the bolt if it doesnt have enought air cause i checked all the oring they were alll fine everything was lubed the only other thing i could find was that it doesnt look like the bolt screwed all the way in but thats as far as it goes some incite would be appreciated.

[Idontknowmyusername]

have xou allready changed the rings of the backcap (the big green one and the 2 small yellow ones)?

[PedroBR]

air between 0-1000 is a bit wide, no?

If there´s not enough air/pressure it can leak all the remaining air through the bleed hole yes. Best thing you do is to do not mess with anything until you have real air.

[Idontknowmyusername]

300-400psi are enough for the nt, if the pressure is lower is there a possibility of a to low initialiton pressure

[Blusylver]

i have noticed that if i put a tank on that has next to no air (600 and below) it usually leaked, however if the gun was already pressurized and the air became that low i was fine.

i say leave it alone until u get a tank with more air in it

[koolaid335]

Originally Posted by PedroBR

air between 0-1000 is a bit wide, no?

If there´s not enough air/pressure it can leak all the remaining air through the bleed hole yes. Best thing you do is to do not mess with anything until you have real air.

thats what i was thinking i think i might of had 500 psi in it thanks for confirming it ill be at my field this sunday and ill see if that was the problem

[koolaid335]

Originally Posted by Blusylver

i have noticed that if i put a tank on that has next to no air (600 and below) it usually leaked, however if the gun was already pressurized and the air became that low i was fine.

i say leave it alone until u get a tank with more air in it

this is also exactly what happend i had to tanks one started with 3k psi and i shot it down to 0 and it was fine but the tank with like 500 in it just leaked out right when i aired it up

[Blusylver]

cool glad i could help, and that it shoots fine

[DLXPredator]

I'm having the same problem :s