[shady_lizard]

1 of 1 04 UL'd Highlander Viking

Pics:



Specs:
Full noid milling
Hidden pocket
Quad detents
Warped bolt pin (at least i think it is; not stock in any case)
Robtown valve (almost new; about 2 cases through it)
DC thin tray
PM5 UL frame with Tadao DM6 Trauma board
Matching Stock Javelin

Extras:
Dieted stock frame with JMJ blade + JMJ nervous triggers
Milled tray
Tadao Ebisu board
Stock Tornado valve
BNIB Stock hammer assembly (cartridge, hammer, and shaft; still sealed)
AKA bag
04 toolkit
2x replacement Sidewinder cores

All milling by DC.

i'm thinking $1000-1200?

[skinnyfatguy]

I would imagine you could get in that price range selling the gun and then parting the extras out. It's going to be a much harder sell as a package and it's very unlikely you'll get as much.

[yuik (Banned)]

Originally Posted by shady_lizard

i'm thinking $1000-1200?

think again.

you would be lucky if you got that for an unmolested highlander excalibur (less then 20 of these exist).

[gunhero5]

Originally Posted by yuik

think again.

you would be lucky if you got that for an unmolested highlander excalibur (less then 20 of these exist).

8 are known to exist.

And you can get a lot more than $1000 for one of them.

[tiny_the_tokin_bear]

I think I'd likely giggle at an offer of $1000 and not bother responding truth be told, I'd be tempted to pick up a second if I were to see one for that low.

[SPYDRMN22]

Valhalla Viking

One of just 30 custom made. This one is #10. The upgrades are: FBM hooker feedneck, ACiD Custom carbon fiber Trigger, Stock AKA Quad detents, DC custom Volumiser, SCM III, RT Valve, Frenzy Frame, Ebo 8 Tadao Yakuza OLED Board, SST Regulator, Black SPD Panels, CP on/off, Javelin barrel, aka bag.

[sanguinarius]

jmj with tadao ebisu

[TheePsycho]

$550

[custar]

Price check please on an 03 Crusader Viking. The eye covers are supposed to be on the way back to me after being used as models.





custar

[Paintballislife42]

Custar, very nice!

[Torque]

'04 JMJ Featherlite Viking.
RT valve
1st gen 2 liter reg.
Matching eye covers, tray, grip frame, lpr housing, and trigger.
DC Volumizer.
Tadao Yakuza board, up to date.
BP no rider feed neck.
Warped bolt pin
Short 2 liter reg extender.
Bob long ASA in 'gloss black'

There is a 1/4" scratch on the reg, visible in the pics. there are two pin head size dots on the left side of the gun, also visible in the pics. Other than those things, the gun is in absolutely great condition. It functions flawlessly. It has sat in my bag as a back up for months. I am only selling it because I am tired of the wait on custom guns (which is what this one was going to become). No barrel is included with the gun.

The pics are current, but do not include the matching tray. It is currently on its way back to me after being left at a team mates house during tech work to install the Frenzy Frame. It will be included with the gun instead of the gloss black tray in the pictures.

[tiny_the_tokin_bear]

edit:
While waving hand in a Jedi-like manner: "You wish to sell me the 2 liter...."

[custar]

Originally Posted by tiny_the_tokin_bear

You wish to sell me the 2 liter....

You must waive your hand in a Jedi-like manner for that to work.

custar

[tiny_the_tokin_bear]

The desire for a first gen is strong with this one...

[paintballer35]

[/quote]

Tadao Ebisu Board
SCMIII
DC Volumizer
Brand new detents
AKA Clamplock feedneck
Acid Customs Trigger

[gunhero5]

You just bought that off Tek, right? I'd say the price you bought it for was fair. Bonebrake Excal's are a hit or miss. Some people hate how it looks, some like it. You'd have to find the right buyer.

[paintballer35]

Originally Posted by gunhero5

You just bought that off Tek, right? I'd say the price you bought it for was fair. Bonebrake Excal's are a hit or miss. Some people hate how it looks, some like it. You'd have to find the right buyer.

i traded for it actually, but yeah i got it from him.

[DvS21]

Just got it back from DC
full tune up
updated bolt hardware
rebuilt cartridge
SCM3
sling trigger

I also have a matching scepter kit with 5 sizes and 14 and 16 inch fronts. and the AKA bag.

I think maybe 750 for everything?

[jimmyjobob]

Nice marker.

I think maybe 750 for everything?

I think that would sell fairly quickly. Granted the resale is way down but there is alot of work into that marker. Then again, that pattern may not be for everyone. Hell, you can get 50 for the bags alone. Having said that, I would ask $875 for all and still a deal. Tadao, pandora or was, RT or regular valve. (a few things that can make it go up or down)

["T-MAC"]

Pretty much what Jimmy said. If I had the cash I'd make an offer. GL. Nasty gun

[DvS21]

Originally Posted by jimmyjobob

Nice marker.



I think that would sell fairly quickly. Granted the resale is way down but there is alot of work into that marker. Then again, that pattern may not be for everyone. Hell, you can get 50 for the bags alone. Having said that, I would ask $875 for all and still a deal. Tadao, pandora or was, RT or regular valve. (a few things that can make it go up or down)

WAS and regular valve. I forgot to add that.

I'm not dead set on selling but it's good to know what I'm holding on to.

thanks for the help guys.