mini'd karni pump kit?

Eudaemon87 · 11-02-2011, 12:27 AM

does anyone know where I can get a pump kit for a mini karnivor?

eudaman · 11-02-2011, 01:55 AM

if its mini'd, then any mini kit would do. there are a couple of choices out there. CCM , sanchez, gat... just to name a few

Eudaemon87 · 11-02-2011, 09:58 AM

The wwa mini kit on my other pump does not fit the karni body I have and I have been told that the ccm one does not fit either.

Cdn_Cuda · 11-02-2011, 03:58 PM

I have run a WWA Mini kit on a full bodies karni, so I'm surprised it didn't work for a mini. Please note that because of the karni's milling, the pump kit is able to wobble side to side (Karni has a round body, where standard has a rectangle body. To stop this, use teflon tape or loc-tite. Otherwise, it could be a problem with the threading of the front block when the karni was cut down.

Eudaemon87 · 11-02-2011, 04:07 PM

Yea the diameter of the hole for the pump kit to screw into is too small for the pump kit

EvilAuthorityX · 11-02-2011, 06:19 PM

you should just post up a full pic of your gun/ the individual parts so we can see what the damage is. we can probably address some of the problems better. IMO the poump kit you have may be salvagable if sent to a machinist

you should really try to get your T2 back tho.

Eudaemon87 · 11-03-2011, 11:14 AM

thats a great idea here is the link to the thread with all the parts. http://www.pbnation.com/showthread.p...3#post73385803

do you know a machinist that would be up for the task of fixing my pump kit?