[jwongie]

anyone have a list of compatible and not compatible boards? Angel boards in particular?

[Heaton]

Just use a T board? Why do you want to use an angel board with an MQ? And I am 99.9% sure that will not work.

[Dk-79]

I think any board that has a dwell and operates at the same voltage that runs an MQ would work.

But I have no idea what that voltage is. Good luck though, You may be able to adapt a cocker board into an angel frame, but I'm not sure of that either.

[jwongie]

Originally Posted by Heaton

Just use a T board? Why do you want to use an angel board with an MQ? And I am 99.9% sure that will not work.

just wat i have available at the moment, the tboard i bought wont power up.

[Fearless_Leader]

Most boards that have a cap should run it, unless its a ecocker...

[Rebel_816]

problem with most boards is that they are only designed to power 1 solenoid where as e-cockers have 2. also the sear solenoids/mq valves need a pretty good amount of juice so a cap is usually needed for it to work consistantly.

[Drix]

I hate resurrecting an old thread but I thought this might be fairly useful in the future if anyone is searching for it. Not only do you need a board that runs 2 solenoid but you need one which has a large dwell adjustment.

With that said, the most popular boards seem to be:
1. E2
2. Zero B

Boards that will not work:
1. E1
2. Scenario Dreams cocker board
3. Pandora for excal'/Viking

All these boards do not have enough dwell adjustment to properly time the mq2.

[Rebel_816]

scenario dreams universal t-board should work though. pretty sure theres an option for it to run 2 noids.