I've already spent quite a bit of money customizing this gun to add some personal touches. I've decided that since I don't play anymore that I should sell my markers to someone that will appreciate them.
Here is a quote from the original for sale thread. I have included his pictures plus mine and have added a CCM leverlock to the feedneck. Either Co2 can be used or a regulator and hpa could be used as well.
Custom Sterling Body & Pump Handle milled from stock aluminum by CoolHand From Logic Paintball
Dual pump arms with sled was added
T Slotting to the frame has been added
Dual Angel Detents have been added to body
P.E. Angel threaded detents
Cocker barrel threaded body
CCM Feedneck with leverlock (AKA Threads)
Second gen sterling hardware, aluminum bolt and slider frame.
Custom Delrin Bolt
Hard Air Line
CCM Cram & Jam with custom AKA threaded adapter
CCI Bucket Changer
AKA SST Regulator
P.E. POPS ASA
14" Freeforce Autococker Barrel
Originally Posted by CoolHand
Ok, I never thought I'd be selling this marker, but with things in the shape they're in, it appears I cannot avoid it.
It really pains me to sell this marker, so I will not be letting it go cheap.
It is a one-of-one, built by hand, by me, for me. I have the better part of a month's worth of machine work and fitting in this thing, and months on end before that spent on making the design work.
Body and pump are 6061 T-6, built from scratch. Uses 'cocker threaded barrels, AKA threaded feed tubes, and Angel threaded ball detents. Uses second gen Sterling lower tube hardware (hammer, sear, valve, etc), and a second gen Sterling bolt and pump arm. It is set up for a vertical bottle in front of the frame, and has a stainless steel hardline that runs from the VA to the valve body in the rear. It has a second gen Sterling aluminum frame, and comes with the CCM feed neck pictured. There is also a delrin sleeve that goes inside the pump handle to prevent the aluminum pump handle from marring the finish on your barrel, but it will need to be pressed in and cut off flush after everything is anodized. It's very simple to do, so if you buy it raw, another machine shop or airsmith could easily do it, or I can do it for you if you send those parts back.
Current pictures of modifications done to marker.
Price is $950 OBO