Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 08-26-2011, 05:44 AM #1
Join Date: Jan 2011
Dye Dm10 Virtue Board (few questions on settings)

Hello, I would like some help on setting up my virtue board...
First of all I have a dye Dm10 with extra polished bolt, and i like it with Dwell 21, and lpr as low as possible. The rules I play with are millennium and Xpsl (15bps semi).

My questions are concerning:
1. Eye delay
2. Debounce
3. Anti mechanical bounce

I know what they do as posted in the virtue board manual, my question is what do you guys think is best, as setting for each of the above, considering the rules (millennium & xpsl) and my marker settup (high dwell, low lpr)


Last edited by Sybiria : 08-26-2011 at 07:31 AM.
Sybiria is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 08-26-2011, 01:01 PM #2
Read the manual!!
gamer565's Avatar
Join Date: Dec 2005
Location: OK
 has been a member for 10 years
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
gamer565 supports Ninja Paintball
Try stock settings and see how that does for you.

Also running a high dwell is going to kill your efficiency alot. Might wanna consider putting the dwell at stock and sweetspotting the regs.
gamer565 is offline   Reply With Quote
Old 08-26-2011, 01:36 PM #3
Join Date: Jan 2011
Thanks for the info, but i already have the dwell settup exactly as i want it, air takes me through enough paint. My questions are for the eye delay, debounce and amb value settings
Sybiria is offline   Reply With Quote
Old 08-27-2011, 11:04 AM #4
Uziel Gal
It's not a Geo2, honest..
Uziel Gal's Avatar
Join Date: Mar 2004
Location: London, UK
Uziel Gal donated to help Peyton Trent
Uziel Gal owns a Planet Eclipse Geo
Uziel Gal owns a Planet Eclipse Ego
Uziel Gal supports our troops
As stated, for the eye delay, use the stock setting unless you have reason to change it. If you chop for instance, and there are no other reasons for it, then you can try increasing the eye delay. The eye delay setting you need to use will vary to some degree - for instance, depending on the speed of your loader.

Debounce and AMB are also settings to adjust *if* they need adjusting. We can't advise you on the best settings for these adjustments, as they will vary from marker to marker, so what works for us may not work for you. They are very dependant on how your trigger is adjusted - a shorter and/or lighter trigger pull will tend to bounce more, and so if your personal trigger adjustments are causing trigger bounce, you would need to adjust the debounce and/or AMB settings accordingly. On the other hand, someone with a longer and/or heavier trigger pull may not need to adjust them, or could maybe even reduce the settings.

You've got to find the settings that work best for your own particular marker.
Uziel Gal is offline   Reply With Quote
Old 08-27-2011, 01:56 PM #5
Join Date: Jan 2011
Thank you, will try a bit of testing tomorrow. I have a very sensitive trigger (due to preference), so i might play around with those and see how it goes. As for hopper speed, im using a rotor so the feed speed is very good (i think)

Thanks again
Sybiria is offline   Reply With Quote
Old 10-16-2011, 07:25 AM #6
Charm City Chokehold
vader09rail's Avatar
Join Date: Oct 2009
Location: 410
vader09rail supports Bob Gurnsey
vader09rail supports Pev's Paintball
vader09rail has achieved Level 1 in PbNation Pursuit
vader09rail has achieved Level 2 in PbNation Pursuit
Just as a are my setting for my Virtue OLED in my DM10:

ROF- 12.5
DWELL- 13ms
EYE DELAY- 3.8ms

Never have had a chopped ball once with this board or even the stock one...Loader is a Prophecy. I get 5-7 pods and a loader off a hot 68/4500 fill playing 5-7 man airball games.
Polished Black DM10 with Virtue OLED board, CP ON/OFF, Red Laser Eyes
Argyle DM7 with Virtue Redefined board, CP Flow Plug, CP ON/OFF, Blue Laser Eyes
Silver/Black PM8 with CP ON/OFF and Updated stock UL Board
Originally posted by Saber66: DM's are only as good as their maintainer...
vader09rail is offline   Reply With Quote
Old 10-19-2011, 10:21 AM #7
Join Date: Jan 2011
Cheers mate. Got similar settings down, only big diffrence is that i use alot more dwell than u. Dont need that much air. I got my dwell at round 21!
Sybiria is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump