[fallen baller]

Originally Posted by angelman092

will slick-oleum work for lubing the ram ??? pm me with the answer please

Violent Series pb oil seems to work great, and you will only need one or two drops of the oil, DO NOT USE GREASE, personal experience taught me so, luckily I could drive down to la paintball, and the tech was able to fix with no prob.

[fallen baller]

Originally Posted by angelman092

will slick-oleum work for lubing the ram ??? pm me with the answer please

Is slick-oleum oil or grease, if it is grease, don't use it, just use one or two drops of violent pboil.

[emerluvinpb!]

can i use vasaline on my legend? gun only has 1 o-ring obv lol
lmk

[fallen baller]

Originally Posted by IMPY~[e^A]

Exhaust Valve Removal

Remove your grips. Then unplug your solenoid harness.



CAREFULLY REMOVE YOUR TRIGGER FRAME, DO NOT PULL THE FRAME OF COMPLETELY. WHEN YOU CAN SEE THE EYE WIRES UNPLUG THEM FIRST.




This is what things should look like after frame removal.



Remove the set screw holding in the front block.



Remove the front block.



The Exhaust Valve Assembly should just fall out. Clean off any debris.



To reassemble just do everything backwards.

adaM.

you will really need this thread if you plan on use sleek 33 or anyother grease for your legend. I learned the hard way in using sleek 33 for my legend and got the 'noid filled up with the grease. you only need a few drops of any paintball marker oil for the appropriate o-rings.

[fallen baller]

Originally Posted by emerluvinpb!

can i use vasaline on my legend? gun only has 1 o-ring obv lol
lmk

no vaseline boss.

[fallen baller]

Originally Posted by ghettomonkey12

people were telling me to oil the ram not lube it is tht true???

yes that is true, just use little oil

[nickpaintball98]

kfdf

[T-BO08]

thanks

[pbbuddy12]

One thing I have noticed with mine is that when I pulled the front block and valve assembly out had a few small o-ring pieces that came out. The two screw holes, one for the front block and the one for the front frame screw had tiny tiny burs sticking up. With a dental pick and some sand paper got it smooth. It was causing small cuts in the orings and in turn a small leak.

Something to just keep an eye on.

[100%_HeArT]

is Vaseline good to use as lube? dont have any sl33k or dow 33.....lemme know!!