I have owned 3 v2 legends and have never had a single issue ever. Ironically I had a tourny last weekend and was planning on playing with my newly acquired used v2 legend i just picked up. WHen I got it the prevous owner had stupidly used dow 33 grease on the rammer instead of oil
. I cleaned this off and reoiled the whole gun with eclipse oil. I played saturday the day before the event to run some drills and it just so happens that the hose on the inside of the gun blew. I went to the nearest ace hardware and the ******* there gave me fuel line instead of microline and that blew instantly. I then went 30min away to my nearest field and I was able to get ahold of some microline and I fixed it. But upon reassembling my legend the solenoid only clicked about half the time. I then looked for pinched wires and such and found my solenoid wires starting to strip. After this I went back to ace and got a cheap soldering kit and went to work. After doing this several times I could not get the noid to click all the time. I then gaveup and packages the noid and wire harness to mail to infinity. I ended up using my buddies etek 1 but was dissappointed I couldnt use my "workhorse" legend.
