[offroadsocal]

ok i just picked up an epiphany and i am haveing trouble geting it to keep shooting i is at 200 psi and first shot no problem if you try to rapid fire it. it will drop down to only about 100 psi and if you stop shooting and let it build back to 200psi it does the first shot and then droops off agipon. has a brand new battery, and i have screwed with the dwell and its not fixing it i belive i got it up to 40 and it was still doing the same thing. i need help fixing this problem dont want to pay the local shop to fix it there *** holes.

[sumsemperfi]

Sound like the tank Isnt screwed in all the way or to far. So screw it in and then screw it back a quarter of turn.

[ERA_Evil]

well first of, epiph is an ion on steroids
main difference is the firing can, wich has inserts
also, the epiph runs a a max 260/280 psi
ion no more than 180 or you bust it, so first off
get the manual to it, and open er up and see wich insert
you have in the firing can, (different colors)
according to the color and your preference, use the manual
to see what insert you need and what pressure, but it should
well be over 200 in any case

[keeperdude]

Agreed, sounds like tank may not be screwed in right, if thats not it then take apart your air system and make sure it is clean. make sure the reg doesn't have any crap in it.

The problem isn't that you don't have enough air in the can, but that it isn't getting there fast enough. That makes me think something is clogged or partially unplugged somewhere in your air system. Time to open 'er up.

[lordhelmet]

Just spamming an old thread to get my required posts so I can PM

[lordhelmet]

2

[lordhelmet]

3

[lordhelmet]

4

[lordhelmet]

5