decked out trracers

The Inflicted · 03-22-2011, 03:12 PM

Quote:

Originally Posted by Shady33

Also had a question about the bottomline kit, how long does the braided hose have to be to mount it underneath ?

Quote:

Originally Posted by Pump Scout

If you can avoid braided hose, I would. It really limits your options on mounting. Mine was just long enough to do the job with a little adjustment room, once I get home tonight, I can measure it if you'd like.

I'm just the opposite. I prefer the added durability of braided hose and the fact that there are fewer places for the line to develop leaks.

The hose on my Trracer right now is 8.5" from end to end.

nerdcore · 03-22-2011, 11:10 PM

Not really decked out at all but here it is:

EDIT: Played with the bottomline for a couple days, w/ an app 50 ct, worked out pretty well. So there's the updated pic. Took off the foregrip, though, wasn't crazy about it.

Magus Shadow · 03-30-2011, 08:07 AM

Quote:

Originally Posted by Sh00t2Thrill

Love posting this one...

disclaimer: low output tank just for show

Haha, LOVE the go-pro facing back.

BTW, Howdy neighbor.. Ann Arbor can stop this "We're gonna be warm for a few days, then go back to freezing just to mess with you" weather system of ours. Gotta love that air tank :-p

Lazarusrat · 04-19-2011, 06:58 PM

tristanot · 04-27-2011, 01:12 AM

Not as hot as some of yalls, but not too shabby.

smellslikepork · 05-18-2011, 07:47 PM

Any ideas on how to improve aim, possibly adding a nub on tip of barrel? Having a hard time adjusting when using the small nub next to the feedneck. Should I just get a longer barrel and sight down with that?

R3L · 05-28-2011, 03:47 PM

This is my Boom-stick!

vijil · 06-07-2011, 10:00 PM

PE POPS asa ftw. Also Apex2 and cheap vert grip and primo and bottomline mod. Dunno how you guys can stand the macro out the back like that.

CON*RAD · 06-09-2011, 06:26 PM

Quote:

Originally Posted by smellslikepork

Any ideas on how to improve aim, possibly adding a nub on tip of barrel? Having a hard time adjusting when using the small nub next to the feedneck. Should I just get a longer barrel and sight down with that?

Looks like someone finally took my advise on the tiger shark pump handle

R3L · 06-11-2011, 10:56 AM

Does that handel bolt-up without modification?

piejo · 06-11-2011, 08:01 PM

What length apex are you guys using?

vijil · 06-11-2011, 08:58 PM

14. Anything more and you can't use the velocity key.

**Pump Scout** · 06-11-2011, 09:26 PM

Be aware, a standard Trracer can run the Apex2, but not the original Apex. The original's tube is too short to allow the pump to run fully forward.

stalefishsk8er · 06-12-2011, 09:17 AM

Quote:

Originally Posted by DuckTape Dude

dude where can i find that stock?

Ginga G · 06-14-2011, 01:56 AM

Quote:

Originally Posted by CON*RAD

Looks like someone finally took my advise on the tiger shark pump handle

What size apex is that and did the pump handle just go right on?

snapshot82 · 06-14-2011, 09:06 PM

will some of this stuff fit on the original? that pump handle looks like it will....

CON*RAD · 06-15-2011, 08:59 PM

Quote:

Originally Posted by Ginga G

What size apex is that and did the pump handle just go right on?

14 inch, yes the pump screws right in with no modification. You have to use the tiger shark screws with it also.

Ginga G · 06-22-2011, 11:32 AM

Ill post pics of my trracer once I get my folding grip and 13cu tank, thing should be pretty awesome then.
Where did you get the tiger shark pump handle? Had one laying around or do you know where to buy just the handle/screws?

CON*RAD · 06-26-2011, 04:03 PM

I had one laying around, last I checked you could get the clear ones from IIsports.com

You can find tiger sharks for dirt cheap if you want a black one though.

ROBltxPB · 07-15-2011, 08:12 PM

RAZRBAKK · 07-23-2011, 02:47 PM

Finally got a bottomline, and the stick feed. Will be modifying the stick feed, but for now, this will do.

For the snake:

For the woods: