i bought a proto slg off my friend and the battery was dead and i just put in a new one and i turn it on and it dosent flash. it goes from orange to solid red and if i hold the bottom button it flashes red and the solenoid works. i cannot program it, please help!
well i have a UL SLG. the reason its red is because the eyes dont see a ball in place to let you fire. the bottom button lets turn off the eyes which lets you fire with no paint. without any air in your marker, you can put your finger in the chamber and the led should change to green. the solenoid should click but you have to remove your finger and put it back in to fire again. the eyes need to see each other before another ball goes in.
to enter programming mode you need to flip the DIP switches.
BEST think to do is go through the manual first. you can download a copy thats at the top of the forum if you dont have one.