[c110man]

Hi

So i am trying to install a new lurker bolt in my Axe.

After fighting the spacer for a bit i got it on the bolt guide (scrapped up my bolt guide anno from a burr i had to sand out).

Now when i put the derlin bolt on the guide and install it into the gun the bolt sets to far forward and balls cannot feed. This is without the gun even being aired up.

I have really mashed the crap out of the spacer trying to get it further down the bolt guide but it looks like it is as far as it going to go. There is a bit of space between the big stop plate and the spacer.

I dont know whats going on with this.

[hawaiian_bread]

have you tried contacting lurker directly here on the forums? I personally don't have a lurker bolt but from what i've seen, he gives fantastic customer service.

[Regretful]

Don't they send a spring with the bolt too?

[MATTSDAD]

No you use the stock spring.
Op- are you sure the bolt is instaled correctly? There is a good picdirections on I believe pg 8 in the mini eigenbolt thread.

[c110man]

Didn't take off the bumper o-ring.

FML

Problem solved.

[dusto1002]

what size is that o-ring does anyone know??? i ripped it and i cant find a matching one anywhere!!


if you could pm me size!? anyone.. lol

[Lurker27]

Use a tank o-ring 015 or the hard 014 i'm including now.

[dusto1002]

im now having the same problem, but i did take the bumper o ring out.. my paintballs cannot feed and all o rings are in place.... soooo??? what the hell?

the bolt sits too far forward.

[ncervantes]

take some pics dude and that will help us out. It's probably something very simple.