 |
03-08-2011, 10:01 PM
|
#1
|
|
|
Accuracy
Hey everyone. I have been playin' with my quest and was curious what you guys do to get more consistency. I have been having some accuracy problems but I think that is just the fact that I am getting +/- 12-15
I have a critical quest, so I am using a CP HPR and I'm at stock settings...any suggestions?
__________________
www.ANSgear.com
www.boblongdirect.com/
http://www.warpedpaintballpark.com/
|
|
|
|
03-09-2011, 12:39 AM
|
#2
|
|
It's not a Geo2, honest..
Join Date: Mar 2004
Location: London, UK
|
Service the regs for one thing, try a fresh quality battery, maybe up the dwell a bit. If the marker is new, it'll need to see some use before the velocity settles.
Paint quality can have a huge effect on consistency, so before you get good consistency, you need to be using fresh quality paint that is actually capable of good consistency.
|
|
|
|
|
03-09-2011, 04:30 PM
|
#3
|
|
Custom User Title
Join Date: Feb 2008
Location: Tempe AZ/Laguna Beach CA
|
Quote:
Originally Posted by Uziel Gal
Service the regs for one thing, try a fresh quality battery, maybe up the dwell a bit. If the marker is new, it'll need to see some use before the velocity settles.
Paint quality can have a huge effect on consistency, so before you get good consistency, you need to be using fresh quality paint that is actually capable of good consistency.
|
Thats a huge one. Also, me sure to get a good bore to ball match on your barrel, that will up consistency in a huge way. Best of luck! |
|
|
|
|
03-10-2011, 01:28 AM
|
#4
|
|
Taking Power Tokens
Join Date: Nov 2006
Location: Fremont, Ca
|
Aside from what was already mentioned...
I put my dwell at 12-14 and i reset my lpr when I play. Back it out all the way and increase until the bolt fully cycles, then increase slowly until your getting consistent numbers on the chrono.
|
|
|
|
|
03-14-2011, 10:51 PM
|
#5
|
|
|
My quest is workin great now. thanks guys!
__________________
www.ANSgear.com
www.boblongdirect.com/
http://www.warpedpaintballpark.com/
|
|
|
|
|
04-18-2011, 06:33 PM
|
#6
|
|
Rose, you're an idiot
Join Date: Dec 2003
Location: I Chill in Ill
|
yea, in theory you should re-set the lpr each time you chrono. but on one does. In addition to that, at least my paint has been getting very inconsistant within the same case.
|
|
|
|
|
04-27-2011, 01:32 PM
|
#7
|
|
|
Don't forget paint swells a little once its been opened for a while... temp. and humidity are to blame. So if you bore size/blow through test in the morning, play all day and notice different consistency towards the end of the day the balls may have swelled up a bit... I like to overbore a little with open-bolt guns even though it hurts efficiency it can help consistency.
I like the LPR suggestion, I'm gonna take that under advisement next time I run my Quest...
__________________
I don't need 12.5 welts a second.
Old Feedback
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
