[Eclipse4life005]

This Was My Friends Nt Not Mine! His Gun Is Fixed As Of Now But Ill Post Back If I Need More Help. Thanks Guys!

[outlandish ogle]

same thing happened to me today switch the blue o ring out on ur bolt tip fixed it right up!

[Brammie]

Check your eyepipe for cracks. If you have a spare eyeypipe, change it and see if that makes a difference.

[Eclipse4life005]

Originally Posted by outlandish ogle

same thing happened to me today switch the blue o ring out on ur bolt tip fixed it right up!

thats it? just change it? but do you know why the oring causes chops?

i sadly don't have another eye pipe but it doesnt have any cracks

[warpig12354]

Sorry for the off topic, but are those really your cars? And you have an SL91?

[DumbDumb]

check if eye pipe is wobly, not just cracked

[allout2]

Originally Posted by warpig12354

Sorry for the off topic, but are those really your cars? And you have an SL91?

and as for the problem, my friend had the similar problem and he fixed it by replacing the blue oring as well, hopefully that works

[Eclipse4life005]

Originally Posted by warpig12354

Sorry for the off topic, but are those really your cars? And you have an SL91?

Yes they are! I love em to death! The 458 is my fav right now, can't get over the engine noise with the tubi exhaust on it! Yum Yum!

[Eclipse4life005]

Originally Posted by DumbDumb

check if eye pipe is wobly, not just cracked

Nope. That son of a ***** is in there good (tehehe). Thanks for the help! Always appreciated!

Originally Posted by allout2

and as for the problem, my friend had the similar problem and he fixed it by replacing the blue oring as well, hopefully that works

I snagged some paint and air. So I am about to try it and hopefully that fixes it. Good to know that its just that oring! Thanks and I will let everyone know what the results are!

[Eclipse4life005]

Replacing the blue oring sadly did not work

[rjs21]

dwell to 8 and new battery. If not, replace every oring and lube poppit.

If none of the above work, your solenoid has gone bad.

[orig*HG*sex]

What loader are you using??? EVERY time (literally) i used a velocity jr my nt chopped, but with a rotor it was flawless.

[Cnoddings0364]

It's probably the tension on the loader. It would help to know what your reg psi is at as well.

As for your sig.. Nice!!

[Eclipse4life005]

Originally Posted by rjs21

dwell to 8 and new battery. If not, replace every oring and lube poppit.

If none of the above work, your solenoid has gone bad.

I know this gun inside and out, but what or where is the poppit. Or do you mean spool?

Originally Posted by orig*HG*sex

What loader are you using??? EVERY time (literally) i used a velocity jr my nt chopped, but with a rotor it was flawless.

I'm using a Empire Reloader B2 and I've turned down the settings but idk what would work the best for the NT.

Originally Posted by Cnoddings0364

It's probably the tension on the loader. It would help to know what your reg psi is at as well.

As for your sig.. Nice!!

Wouldn't suprise me if it was the loader. But sadly I do not own a pressure tester. But I know these things go bad fast lol. I was hoping someone in CO had an extra...
Thanks dude! I love em all for different reasons lol. But I have always been SUPER jealous of your guns! The SL91 just about killed me and you almost made me put 7k in paypal haha.

[Empwrd]

There is no poppit. It could be your spring as well. Sometimes changing out the spring to a stiffer spring would sufice. Try that also. In regards to loader if its a rotor lower the tension. The screw should be flush with the housing

[Eclipse4life005]

I don't have a rotor. I have an Empire Reloader B2.

[fragmortus]

Originally Posted by Eclipse4life005

I don't have a rotor. I have an Empire Reloader B2.

use speed setting 1 with the tension moniter on that works for me using 12.5