Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 05-16-2002, 09:18 AM #22
PrettyPistol
 
 
PrettyPistol's Avatar
 
Join Date: May 2002
 has been a member for 10 years
Quote:
Originally posted by me262
shaft, (2 different versions)
is ne thing different needed for the other version?(i have the silver one).

oh, and how much does loctite run?

Thanx, this thread is prawly one of the most usefull i've seen!!
keep it up
__________________
Collette_amc@comcast.net Feedback AIM= RockinDaSpeed
~Vision-Impulse~ (Powered by ECS)
FattyStabilizer, Freak Barrel System, NDZ Equalizer Bolt, NDZ Rip Valve, NDZ Slik-Shot Ram Shaft, NDZ 15* ASA, Extreme Rage Clamping Low Rise, DYE Stickies, CP rail, JackHammer LPR,
Worrgass adj. 4.5K, 70ci,
Centerflag adj. 4.5K 68ci,
Evo 2 Clear Y-board
PrettyPistol is offline   Reply With Quote
Old 05-17-2002, 03:03 AM #23
me262
corporate slave
 
me262's Avatar
 
Join Date: Jun 2001
Location: green river, WY
 has been a member for 10 years
here a pic of the other ram version with the snap ring. (like an angel)
Attached Images
File Type: jpg snap shaft.jpg (68.0 KB, 475 views)
__________________
www.NeuWerldExtreme.com
I SOLD OUT, oh well maybe i can get stuff done now....
if i speak at one constant volume, one constant pitch, one constant rhythm, right in to your ear, you STILL wont hear. (faith no more)
LONG LIVE THE SERVOS!!........
me262 is offline   Reply With Quote
Old 05-17-2002, 09:14 AM #24
PrettyPistol
 
 
PrettyPistol's Avatar
 
Join Date: May 2002
 has been a member for 10 years
THanx, that helps. my gun should be up an runnin better than ever when i get my o-ring kit and sidewinder from Blue!!
I'm really excited to play. by the way, it seems like not to many people have remotes. whats up w/that? it seems like one of the first tings to do would be to take uneeded weight off the gun.
thanx again for all the fixin up info. i have already used most of it.
is there ne thing on my gun that my Gold Cup gun oil would hurt?
and how easily are revys are affected by rain?

(i'd better get back to my HTML design. I'm in school right now. i'm in 10th grade and i finished my final project so the teach lets us surf all hour. these cable connections kick-a**)
__________________
Collette_amc@comcast.net Feedback AIM= RockinDaSpeed
~Vision-Impulse~ (Powered by ECS)
FattyStabilizer, Freak Barrel System, NDZ Equalizer Bolt, NDZ Rip Valve, NDZ Slik-Shot Ram Shaft, NDZ 15* ASA, Extreme Rage Clamping Low Rise, DYE Stickies, CP rail, JackHammer LPR,
Worrgass adj. 4.5K, 70ci,
Centerflag adj. 4.5K 68ci,
Evo 2 Clear Y-board
PrettyPistol is offline   Reply With Quote
Old 05-17-2002, 11:58 AM #25
Have Blue
Moderator
 
Have Blue's Avatar
 
Join Date: May 2001
Location: Milwaukee, WI
Have Blue is a Supporting Member
 has been a member for 10 years
One note on the old snap ring rams that I just discovered the other night - you can adjust the snap ring 'pressure' by the brass scew on the ram cap. Screwing it in (tightening) compresses the internal o-ring, requiring more pressure to build up behind the ram before it breaks free. Pretty crafty design!

The only thing to take note of is to make sure that some sort of sealant or low-strength threadlocker is used on the brass screw, else air will leak out the back when the ram is activated.
Have Blue is offline   Reply With Quote
Old 05-17-2002, 02:01 PM #26
me262
corporate slave
 
me262's Avatar
 
Join Date: Jun 2001
Location: green river, WY
 has been a member for 10 years
yep, just like an angel

heres a kinda weird thing, i decided to take one of the batts apart, local batteries plus will make them for me for 3 bucks a peice
Attached Images
File Type: jpg nimh apart.jpg (56.9 KB, 415 views)
__________________
www.NeuWerldExtreme.com
I SOLD OUT, oh well maybe i can get stuff done now....
if i speak at one constant volume, one constant pitch, one constant rhythm, right in to your ear, you STILL wont hear. (faith no more)
LONG LIVE THE SERVOS!!........
me262 is offline   Reply With Quote
Old 05-17-2002, 02:08 PM #27
Have Blue
Moderator
 
Have Blue's Avatar
 
Join Date: May 2001
Location: Milwaukee, WI
Have Blue is a Supporting Member
 has been a member for 10 years
I'm not rich enough to own an Angel myself, so I had no idea how the snap ring works (just that they have one).

Cool about the batteries - I didn't know they could do custom packs at those places!
Have Blue is offline   Reply With Quote
Old 05-17-2002, 02:13 PM #28
me262
corporate slave
 
me262's Avatar
 
Join Date: Jun 2001
Location: green river, WY
 has been a member for 10 years
i just stared at the drawings for awhile to figure the angel out.

then got hold of a few freinds guns.

i did have an lcd i had got in trade for the e-monster, but traded it within the same week for a couple more tribals
__________________
www.NeuWerldExtreme.com
I SOLD OUT, oh well maybe i can get stuff done now....
if i speak at one constant volume, one constant pitch, one constant rhythm, right in to your ear, you STILL wont hear. (faith no more)
LONG LIVE THE SERVOS!!........
me262 is offline   Reply With Quote
Old 05-20-2002, 10:05 PM #29
PrettyPistol
 
 
PrettyPistol's Avatar
 
Join Date: May 2002
 has been a member for 10 years
How is this looking?? I'm gonna LOCTITE IT now.
Attached Images
File Type: jpg hammeroring1.jpg (25.5 KB, 376 views)
__________________
Collette_amc@comcast.net Feedback AIM= RockinDaSpeed
~Vision-Impulse~ (Powered by ECS)
FattyStabilizer, Freak Barrel System, NDZ Equalizer Bolt, NDZ Rip Valve, NDZ Slik-Shot Ram Shaft, NDZ 15* ASA, Extreme Rage Clamping Low Rise, DYE Stickies, CP rail, JackHammer LPR,
Worrgass adj. 4.5K, 70ci,
Centerflag adj. 4.5K 68ci,
Evo 2 Clear Y-board
PrettyPistol is offline   Reply With Quote
Old 05-20-2002, 10:12 PM #30
Kevin O'Dell
Play nice or else.
 
Kevin O'Dell's Avatar
 
Join Date: Oct 2001
Location: Behind you, in the shado
 has been a member for 10 years
Looks good. Make sure that when you locktite it that you screw the hammer on completely with no threads showing.
__________________
!WARNING! Contents under extreme pressure. May explode if subjected to whiners, liars or cheaters. Does not play well with wipers. Keep away from open flaming. Failure to follow these guidelines could result in pain, loss of game or serious personal disgrace.

F/S Blue Impulse w/Vision and ups.
Will consider trades for Tribal Twister(pref.2.2) or other up'd tribals
Kevin O'Dell is offline   Reply With Quote
Old 05-21-2002, 09:27 AM #31
PrettyPistol
 
 
PrettyPistol's Avatar
 
Join Date: May 2002
 has been a member for 10 years
should i put an o-ring on my AOC Plunger also?

Thanx
__________________
Collette_amc@comcast.net Feedback AIM= RockinDaSpeed
~Vision-Impulse~ (Powered by ECS)
FattyStabilizer, Freak Barrel System, NDZ Equalizer Bolt, NDZ Rip Valve, NDZ Slik-Shot Ram Shaft, NDZ 15* ASA, Extreme Rage Clamping Low Rise, DYE Stickies, CP rail, JackHammer LPR,
Worrgass adj. 4.5K, 70ci,
Centerflag adj. 4.5K 68ci,
Evo 2 Clear Y-board
PrettyPistol is offline   Reply With Quote
Old 05-21-2002, 09:32 AM #32
PrettyPistol
 
 
PrettyPistol's Avatar
 
Join Date: May 2002
 has been a member for 10 years
what exactly is the bolt link pin, (i am pretty sure i know but i am just checkin) it is what u pull out to take out the bolt. right?

Thanx
__________________
Collette_amc@comcast.net Feedback AIM= RockinDaSpeed
~Vision-Impulse~ (Powered by ECS)
FattyStabilizer, Freak Barrel System, NDZ Equalizer Bolt, NDZ Rip Valve, NDZ Slik-Shot Ram Shaft, NDZ 15* ASA, Extreme Rage Clamping Low Rise, DYE Stickies, CP rail, JackHammer LPR,
Worrgass adj. 4.5K, 70ci,
Centerflag adj. 4.5K 68ci,
Evo 2 Clear Y-board
PrettyPistol is offline   Reply With Quote
Old 05-21-2002, 04:19 PM #33
STEVEN DE LEON
Tribal owner #1893
 
STEVEN DE LEON's Avatar
 
Join Date: Mar 2002
Location: Wharton,Tx
 has been a member for 10 years
Dip Switch Settings

Here are the dip switch settings for Tribals.
Just in case someone needs them.
Tried to post, but couldnt figure how to.
So go here
www.socal-paintball.com/tribe/dips.htm
Hope its helpfull to someone.
STEVEN DE LEON is offline   Reply With Quote
Old 05-21-2002, 11:46 PM #34
Kevin O'Dell
Play nice or else.
 
Kevin O'Dell's Avatar
 
Join Date: Oct 2001
Location: Behind you, in the shado
 has been a member for 10 years
PrettyPistol

DO NOT put an o-ring on the aoc plunger! It already has all the o-rings it needs.

Yes, that is the bolt pin.
__________________
!WARNING! Contents under extreme pressure. May explode if subjected to whiners, liars or cheaters. Does not play well with wipers. Keep away from open flaming. Failure to follow these guidelines could result in pain, loss of game or serious personal disgrace.

F/S Blue Impulse w/Vision and ups.
Will consider trades for Tribal Twister(pref.2.2) or other up'd tribals
Kevin O'Dell is offline   Reply With Quote
Old 06-04-2002, 09:21 AM #35
PrettyPistol
 
 
PrettyPistol's Avatar
 
Join Date: May 2002
 has been a member for 10 years
can u post sum pics on how to adjust the AOC? the explanation at socal-paintball was hard (for me) to understand. especially where exactly the screw is.
Thanx
__________________
Collette_amc@comcast.net Feedback AIM= RockinDaSpeed
~Vision-Impulse~ (Powered by ECS)
FattyStabilizer, Freak Barrel System, NDZ Equalizer Bolt, NDZ Rip Valve, NDZ Slik-Shot Ram Shaft, NDZ 15* ASA, Extreme Rage Clamping Low Rise, DYE Stickies, CP rail, JackHammer LPR,
Worrgass adj. 4.5K, 70ci,
Centerflag adj. 4.5K 68ci,
Evo 2 Clear Y-board
PrettyPistol is offline   Reply With Quote
Old 08-08-2002, 06:15 PM #36
Paint Bull
A Newt? -
 
Paint Bull's Avatar
 
Join Date: Dec 2001
 has been a member for 10 years
for some reason my aoc body wont come out....

did i pt it back in wrong....? it works, so i dont have it in backwards. or at least i geuss I dont....

but for some reason I cant get the aoc body out now?

what am i doin wrong this time?
__________________
[quote=dyeing2live026]psssh, this one time i killed a preganat lady"
Paint Bull is offline   Reply With Quote
Old 08-08-2002, 06:33 PM #37
warpedmephisto
Moderator
 
warpedmephisto's Avatar
 
Join Date: Jan 2002
Location: Columbia, IL
warpedmephisto is a Supporting Member
 has been a member for 10 years
Did you take out the vertical adapter screw? What method are you using to remove the AOC?
warpedmephisto is offline   Reply With Quote
Old 08-08-2002, 06:44 PM #38
Paint Bull
A Newt? -
 
Paint Bull's Avatar
 
Join Date: Dec 2001
 has been a member for 10 years
yeah I took out the VA screw

last time I could stick a screw in, move the screw to an angle so it got stuck and pull it out....

that method doesnt seem to work now, nor does pushing from below


you got another trick?
__________________
[quote=dyeing2live026]psssh, this one time i killed a preganat lady"
Paint Bull is offline   Reply With Quote
Old 08-08-2002, 06:48 PM #39
warpedmephisto
Moderator
 
warpedmephisto's Avatar
 
Join Date: Jan 2002
Location: Columbia, IL
warpedmephisto is a Supporting Member
 has been a member for 10 years
I used to use an allen wrech, stick it in the hole, angle it, and it would pull right now. Then I used the Fury chip extraction tool, just use one leg and it works perfect. I'll try to get a pic up later.
warpedmephisto is offline   Reply With Quote
Old 08-08-2002, 07:07 PM #40
Paint Bull
A Newt? -
 
Paint Bull's Avatar
 
Join Date: Dec 2001
 has been a member for 10 years
after 30 minutes of trying and listening to break stuf over and over i got it....

but now the next thing behing that is not comin out
__________________
[quote=dyeing2live026]psssh, this one time i killed a preganat lady"
Paint Bull is offline   Reply With Quote
Old 08-11-2002, 08:19 PM #41
huh? again
 
 
Join Date: Jun 2002
Location: cali
 has been a member for 10 years
what ram is better?

thanks
-joseph



::edit:: no one knows?

Last edited by huh? again : 08-17-2002 at 12:03 PM.
huh? again is offline   Reply With Quote
Old 08-23-2002, 10:07 PM #42
TiMie74
 
 
TiMie74's Avatar
 
Join Date: Mar 2002
Location: ws, ny
 has been a member for 10 years
Quote:
Originally posted by Paint Bull
after 30 minutes of trying and listening to break stuf over and over i got it....

but now the next thing behing that is not comin out
I wanna tap that one hole for a screw size so it fits perfect. Then get a long screw. It would work so good.
TiMie74 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump